Jinan HORIZON DLS-05 Electronic Tensile Tester 100N 650mm

Test force 100 N, displacement rate adjustment range 1~ 500mm/min, suitable for a variety of Plastic film and composite film performance testing, including tensile strength, fracture elongation, resilience modulus.

$2048.00/set

PromotionLoading...

Coupon

Model：

DLS-05

Certificate

Horizon

Contact

Details SPEC Con CAT

Horizon DLS-05 Electronic Tensile TesterSPEC

Horizon DLS-05 Electronic Tensile TesterDetails

Horizon DLS-05 Electronic Tensile TesterPacking list

SKU: NB033914

test force: 100 N

stretch space: 650mm

Load Measurement Range: 2% of maximum load - 100%

Load measurement Accuracy: ±1%

Displacement resolution: 0.01mm

Displacement speed: 1- (500) mm/min can be selected arbitrarily

Speed Accuracy: ±1%

An indication of deformation error: ≤±（50+0.15L）

Power: 220V±10%V

DLS-05

Electronic Tensile Tester

Application

It is suitable for measuring the tensile strength, elongation at break, and modulus of elasticity of various plastic films and composite films , and can also perform performance tests such as peeling, tearing, and heat-sealing strength.

technical features

1. Touch key operation mode, LCD display real-time display. The display interface can display the test method selection interface, test parameter selection interface, test operation and result display interface and curve display interface

2. It can be pulled off to stop and hold the peak value, and has protection devices such as over-current, over-Voltage, and overload.

3. Can measure stretching, heat sealing, peeling, tearing and other items

4. The force value can be measured by fixed elongation, the elongation can be measured by fixed force value, and the curve can be displayed (force value, displacement)

5. Single-point speed regulation or stepless speed regulation (1-500mm/min)

6. The universal joint adopts a cross pin structure and has the function of limiting the swing angle. On the one hand, it is convenient for sample clamping and ensures the concentricity of the test. On the other hand, the influence of irregular samples on the sensor is well eliminated.

7. Closed-loop control mode, high control precision

configuration

Standard configuration: host machine, a set of standard fixtures, a micro-printer, peel test board, standard pressure roller

Optional configuration: peel test plate, standard pressure roller

Executive standard: GB/T13022, GB/T8808, GB 1040, GB/T4850, GB/T 16578, QB/T 2358, QB/T 1130

FAQ

QI want to test the tensile strength and elongation of Plastic films.

A Recommend DLS-05 Electronic Tensile Tester, which is specially used for Plastic film, composite film tensile strength, fracture elongation and other tests, in line with GB/T13022 and other standards, can accurately measure and display Linear dispersion, simple operation.

QOur laboratory needs to do disbonding and heat sealing strength testing, what instrument to choose?

A HORIZON DLS-05 Electronic Tensile Tester is suitable, it supports disbonding, heat sealing, tearing and other test items, equipped with standard fixtures and disbonding test plates, high control accuracy, can meet the common Encasement material performance testing needs.

QWhen choosing UTM, how can we choose both stretching and constant elongation force measurement in terms of function?

A You can choose HORIZON DLS-05, which can not only do tensile testing, but also determine the elongation measurement value, constant force measurement elongation value, stepless speed regulation 1-500mm/min, LCD display Linear dispersion, comprehensive function, suitable for multiple performance analysis of thin film composite films.

QWe mainly do Plastic film and composite film tensile, tear test, HORIZON DLS-05 Electronic Tensile Tester suitable?

A Suitable. Plastic films and composite films are designed with the DLS-05 for precise measurement of tensile strength, elongation at break and tearing performance. With single point and stepless speed regulation (1-500mm/min), it can well match the Test speed requirements of soft materials such as films to ensure accurate data. Standard fixtures and disbonding test plates can also be used directly for your test projects.

QOur test samples are sometimes irregular, and we are worried about affecting the test results. Is there any specific design for this machine?

A For irregular samples, DLS-05 has two key designs. First, the universal joint adopts a cross latch structure and has a swing angle limit, which can automatically adjust the concentricity and reduce the measurement error caused by the sample clamping error. Second, the closed-loop Control mode can compensate and adjust in real time, effectively eliminate the interference of irregular samples to the Sensor, and ensure the stability and reliability of the test.

Knowledge

Standard

Filter Brand Store Contact