Jinan HORIZON DLS-05 Electronic Tensile Tester 100N 1000mm

Test force 100 N, displacement rate adjustment range 1~ 500mm/min, suitable for Plastic film and composite film performance testing, including tensile strength, fracture elongation, resilience modulus, etc.

$2048.00/set

PromotionLoading...

Coupon

Model：

DLS-05

Certificate

Horizon

Contact

Details SPEC Con CAT

Horizon DLS-05 Electronic Tensile TesterSPEC

Horizon DLS-05 Electronic Tensile TesterDetails

Horizon DLS-05 Electronic Tensile TesterPacking list

SKU: NB033916

test force: 100 N

stretch space: 1000mm

Load Measurement Range: 2% of maximum load - 100%

Load measurement Accuracy: ±1%

Displacement resolution: 0.01mm

Displacement speed: 1- (500) mm/min can be selected arbitrarily

Speed Accuracy: ±1%

An indication of deformation error: ≤±（50+0.15L）

Power: 220V±10%V

DLS-05

Electronic Tensile Tester

Application

It is suitable for measuring the tensile strength, elongation at break, and modulus of elasticity of various plastic films and composite films , and can also perform performance tests such as peeling, tearing, and heat-sealing strength.

technical features

1. Touch key operation mode, LCD display real-time display. The display interface can display the test method selection interface, test parameter selection interface, test operation and result display interface and curve display interface

2. It can be pulled off to stop and hold the peak value, and has protection devices such as over-current, over-Voltage, and overload.

3. Can measure stretching, heat sealing, peeling, tearing and other items

4. The force value can be measured by fixed elongation, the elongation can be measured by fixed force value, and the curve can be displayed (force value, displacement)

5. Single-point speed regulation or stepless speed regulation (1-500mm/min)

6. The universal joint adopts a cross pin structure and has the function of limiting the swing angle. On the one hand, it is convenient for sample clamping and ensures the concentricity of the test. On the other hand, the influence of irregular samples on the sensor is well eliminated.

7. Closed-loop control mode, high control precision

configuration

Standard configuration: host machine, a set of standard fixtures, a micro-printer, peel test board, standard pressure roller

Optional configuration: peel test plate, standard pressure roller

Executive standard: GB/T13022, GB/T8808, GB 1040, GB/T4850, GB/T 16578, QB/T 2358, QB/T 1130

FAQ

QI want to test the tensile strength and elongation of Plastic film. Do you recommend HORIZON Electronic Tensile Tester?

A The HORIZON DLS-05 Electronic Tensile Tester is recommended. It is specifically designed for tensile strength and fracture elongation testing of Plastic films and composite films. Its closed-loop control and High Accuracy Sensor ensure accurate and reliable measurement data to meet your testing needs.

QOur laboratory needs to do disbonding and heat seal strength testing. Does this instrument work?

A Yes. The HORIZON DLS-05 Electronic Tensile Tester supports disbonding, heat sealing, tearing and other performance tests. It comes standard with a disbonding test plate and a standard pressure roller, which is easy to operate and can be directly used for mass detection of these common Encasement materials. Practical.

QIs this tester complicated to operate? Can you see real-time Linear dispersion during testing?

A The operation is very simple, using touch keys and LCD display, the interface is intuitive. During testing, it can display the force value and displacement Linear dispersion in real time, and can also measure the force or the force to measure the elongation. The data is clear at a glance, which is convenient for you to analyze and record the results in real time.

Knowledge

Standard

Filter Brand Store Contact