Jinan HORIZON DLS-05 Electronic Tensile Tester 1000N 1000mm

Suitable for tensile, disbonding, tearing and heat sealing strength testing of Plastic film, composite film and other materials. Touch key operation, LCD real-time display, support force value and displacement Linear dispersion analysis. With high-precision closed-loop control, overload protection, peak hold and other functions, speed range 1-500mm/min

$2048.00/set

PromotionLoading...

Coupon

Model：

DLS-05

Certificate

Horizon

Contact

Details SPEC Con CAT

Horizon DLS-05 Electronic Tensile TesterSPEC

Horizon DLS-05 Electronic Tensile TesterDetails

Horizon DLS-05 Electronic Tensile TesterPacking list

SKU: NB033925

test force: 1000N

stretch space: 1000mm

Load Measurement Range: 2% of maximum load - 100%

Load measurement Accuracy: ±1%

Displacement resolution: 0.01mm

Displacement speed: 1- (500) mm/min can be selected arbitrarily

Speed Accuracy: ±1%

An indication of deformation error: ≤±（50+0.15L）

Power: 220V±10%V

DLS-05

Electronic Tensile Tester

Application

It is suitable for measuring the tensile strength, elongation at break, and modulus of elasticity of various plastic films and composite films , and can also perform performance tests such as peeling, tearing, and heat-sealing strength.

technical features

1. Touch key operation mode, LCD display real-time display. The display interface can display the test method selection interface, test parameter selection interface, test operation and result display interface and curve display interface

2. It can be pulled off to stop and hold the peak value, and has protection devices such as over-current, over-Voltage, and overload.

3. Can measure stretching, heat sealing, peeling, tearing and other items

4. The force value can be measured by fixed elongation, the elongation can be measured by fixed force value, and the curve can be displayed (force value, displacement)

5. Single-point speed regulation or stepless speed regulation (1-500mm/min)

6. The universal joint adopts a cross pin structure and has the function of limiting the swing angle. On the one hand, it is convenient for sample clamping and ensures the concentricity of the test. On the other hand, the influence of irregular samples on the sensor is well eliminated.

7. Closed-loop control mode, high control precision

configuration

Standard configuration: host machine, a set of standard fixtures, a micro-printer, peel test board, standard pressure roller

Optional configuration: peel test plate, standard pressure roller

Executive standard: GB/T13022, GB/T8808, GB 1040, GB/T4850, GB/T 16578, QB/T 2358, QB/T 1130

FAQ

QPlastic film tensile strength and elongation at break, which instrument should I choose?

A HORIZON DLS-05 Electronic Tensile Tester is recommended. This instrument is specially used for testing the tensile strength and elongation of Plastic films and composite films. It meets GB/T13022 and other national standards. It can accurately measure and display Linear dispersion in real time to ensure accurate and reliable test results.

QOur laboratory needs to do disbonding and heat sealing strength testing. Is DLS-05 applicable?

A Applicable. DLS-05 Electronic Tensile Tester supports disbonding, heat sealing, tearing and other test items. Standard disbonding test plate and pressure roller, high closed-loop control accuracy, can effectively meet the film, Encasement materials and other common application scenarios Quality control requirements, easy to operate and stable results.

QHow about the speed regulation and measurement function of the instrument, can it meet different test requirements?

A DLS-05 provides stepless speed regulation of 1-500mm/min, which can measure the elongation of a fixed force or a fixed force, and is very flexible. Its universal joint design can ensure the concentricity of the sample and reduce errors. It is suitable for diverse testing of films, composite films and other materials. It is a comprehensive and cost-effective selection.

Knowledge

Standard

Filter Brand Store Contact