HUITAO CSI-345 reciprocating abrasion Tester, scratch resistance and wear resistance Tester

CSI-345

Reciprocating abrasion Tester

Stroke range 6-150mm Adjustable speed 1-100 reciprocating/min Stepless adjustable Adopt lever equilibrating principle to precisely control the pressure Unique friction arm design to achieve different friction head replacement

Application

Test the scratch resistance and abrasion resistance of coatings, plastics, decorative fabrics, automotive interiors, pile fabrics, etc. The LCD controls and displays the test process, and parameters such as the number of reciprocating abrasions, motion strokes, and reciprocating motion speeds can be set according to user needs. The unique friction arm design realizes the replacement of different friction heads. Precisely control the implementation of pressure according to the principle of lever balance. Fully meet the different requirements of different standards for friction form, friction head, pressure, etc.

Standards

ASTM F2496, ISO 1518-1, ISO 1518-2, GME 60248, D42 1775 MS652-15, DBL 7384-2017 8.10

ASTM F2495—Test Method for Determining Energy Consumption of Reproducible Multifunction Devices and Similar Office Imaging Equipment 

GME 60248 — Scratch resistance test of elastomeric and textile coatings for interiors 

GME 60368 — Linear Friction Test 

GMW 14125 — Linear Friction Test 

MS655-08 — Linear Friction and Scratch Resistance Test

MS652-15 — -Linear friction and scratch resistance test

ISO 1518 — Determination of scratch resistance of paints and varnishes 

ISO 105 X12 — Tests for color fastness of textiles - Part X12: Color fastness to rubbing 

ISO 105 D02 — Textiles. Tests for color fastness. Part D02: Color fastness to rubbing. Organic solvent method 

ASTM F1319 — Standard Test Method for Abrasion and Stain Resistance of Printed Matters (Cribometer Method)

GB/T 9279 — Paint and varnish scratch resistance test, etc.

The test sample is fixed on a horizontal sample stage, and is abraded with the horizontal movement of the sample stage under the specified abrasive and load. The other end of the test arm is equipped with a weight to maintain the balance of the test arm to ensure the accuracy of the sample surface loading.

Packing list：Host X1, test software X1, test arm kit 2 sets X2, weight X6, grinding head X2, H-18 grinding head X2, sample holder X2, brush X1, grinding head repair sandpaper X1, power cord X1, user manual X1, certificate X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.