China

YOUKE YK3056 Needle Flame Tester (Touch Screen)

SE
YOUKE YK3056 needle flame Tester is used to simulate the small flame generated inside the product under fault conditions, and to evaluate the fire risk with simulation technology. The flame temperature of YK3056 needle flame Tester rises from 100 ° C to 700 ° C within 23.5 +/- 1S, Timer is adjustable within the range of 0~99 minutes and 99 seconds, and the combustion time can be set.
$1781.00/set
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con

YouKe YK3056 Needle flame Tester (touch screen)SPEC

YouKe YK3056 Needle flame Tester (touch screen)Details

YouKe YK3056 Needle flame Tester (touch screen)Packing list

SKU
NB036466
test space
≥ 0.5 cubic meters with Glass observation door
combustion gas
Butane gas Butane
Gas Connectivity
Quick Connector with self-locking function
flame height
12mm +/- 1mm adjustable
Thermocouple
Imported from the United States OMEGA, diameter 0.5mm (optional)
Flame temperature requirements
The time from 100 ℃ to 700 ℃ is within 23.5 +/- 1 S
Timer
Adjustable from 0 to 99 minutes and 99 seconds, combustion time can be set, and combustion duration can be recorded
Control mode
PLC + touch screen
Export/Print Function
USB data export function (optional: after the test is completed, the results can be printed out through a thermal printer)
System protection
When the touch screen is in normal use, once a function is activated, the Miscellaneous function will be disabled to prevent mutual interference
insulation grade
Class F
Protection class
IP20 (suitable for indoor use)
Fan noise
65 decibels
Chill down, forced air cooling
Side wind, top wind
Operating Mode
Can work continuously
protection function
Gas alarm, beep prompt, overcurrent protection, etc
Applicable environment temperature
-10℃～+50℃
Mobile mode
Adopt load-bearing universal casters, 2 at the front and rear
Applicable Relative Humidity
≤95%
altitude
≤ 2500 meters
Power
AC 220V/50H
YK3056
Needle flame Tester (touch screen)
YOUKE YK3056 Needle Flame Tester (Touch Screen) Picture

Guideline

IEC884-1, GB2099.1, VDE, IEC335, GB4706.1, GB5169.5, UL1694.

Technical Description

According to the use of this product in electronic and electrical products, due to fault conditions, such as fault current flowing through the leakage path, overheating of components or parts, poor contact, etc., it may cause flames, which may shoot to nearby parts. This test It is to simulate a small flame generated inside the product under fault conditions, and use simulation technology to evaluate the fire hazard. For small parts (or components) glow wire test or horizontal - vertical burning test method is not suitable, the needle flame test method can be used. If the sample ignites during the glow wire test, the needle flame test is required for the resulting combustion hazard. Applicable to electronic and electrical products, components and parts of household appliances, such as: wiring boards, centrifugal switches, rice cooker sockets.

Features

The combustion box of this Tester is beautiful in shape, resistant to smoke and gas corrosion. Time digital display, three-dimensional adjustable fixture, automatic control system, independent ventilation, easy to use for observation and recording, stable and reliable. With temperature measuring device.

security function

The machine is equipped with a gas detection and alarm device. When the gas concentration exceeds the normal value, the alarm device will send out an audible and visual alarm, cut off the gas supply and start the exhaust system to discharge the gas in the Test Chamber until the air quality in the Test Chamber returns to the normal value. . (optional)

FAQ
QI want to test the fire hazard of small parts such as patch panels. Which instrument should I use?
A The YK3056 needle flame tester is specially designed to simulate the small flame generated by Electronics parts under fault conditions. It meets GB 2099.1 and other standards. It is suitable for testing small parts such as wiring boards. Because the hot wire test for small parts may not be applicable, the needle flame method can more accurately evaluate the fire risk.
QHome appliance sockets need to be tested for fire protection. What equipment should I choose?
A Select the YK3056 needle flame tester, which is designed for home appliance parts such as sockets, and assesses the risk by simulating small flames caused by overheating or poor contact. The instrument is equipped with Touchscreen and automatic control, and the test is stable and reliable, fully meeting the requirements of the home appliance standard GB4706.1.
QWhat are the practical functions of the needle flame tester?
A YK3056 is equipped with gas alarm, automatic exhaust and timing functions, which can safely test the ignition of parts; 3D adjustable fixture and temperature measurement make the operation more accurate, suitable for electronic component testing, optional printing function can also directly output results, convenient and fast.
Knowledge
Standard
Filter Brand Store Contact