LEICI DDSJ-307F Conductivity Meter conductivity Electrical resistivity TDS salinity, temperature 1.0 class

DDSJ-307F

Conductivity Meter

Level 1.0, measurement conductivity, Electrical resistivity, TDS, salinity value, temperature, standard composite Conductivity Detector electrode, electrode holder, dust cover and calibrated solution, using high definition LCD, standard composite Conductivity Detector electrode, electrode holder, dust cover and calibrated solution

main feature

● Adopt high-definition LCD with clear display

● Temperature units are optional: ℃ and °F;

● Reference temperature 20℃ or 25℃ optional

●Supports functions such as power-on self-diagnosis, automatic shutdown, power-off protection and factory reset

● Support firmware upgrade function, allowing function expansion and personalized requirements

●Support IP54 protection level

● Comes standard with composite conductivity electrode, electrode holder, dust cover and calibration solution

Intelligent detection and automatic identification

● Intelligent identification of end points, supporting automatic reading, scheduled reading, scheduled interval reading, and manual reading

●Support automatic/manual temperature compensation

● Automatically identify 4 kinds of GB conductivity standard solutions and support 1-3 point conductivity electrode calibration

●Supports multiple conductivity compensation methods such as non-compensation, linear, pure water compensation, etc.

● Supports automatic frequency switching, and is equipped with a 1.0 constant electrode that can cover the full range of measurements (it is recommended to use a 0.1 constant or 0.01 constant conductivity electrode for measurement of samples below 20 μS/cm)

Data management, information traceability

● Support data storage (500 sets each), review, deletion, transmission and printing

● Comply with GLP and realize data traceability

● Equipped with RS-232 interface, supports connection to standard RS-232 serial port printer, and directly prints measurement results. The printing format is optional.

● With USB interface, it can be connected to PC through special communication software to realize data transmission.

Packing list：Host X1, DJS-1VTC Conductivity detector electrode X1, conductivity solution 1408μs/cm (1 * 10) X1, REX-5 type, multifunctional electrode holder X1, manual X1, certificate X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.