QAG-3 levelling Tester YONGLIDA 250~4000 μm WFT
SECoating range 250-4000um; Dimension groove 120 * 22 * 20mm; stainless steel material; in line with ASTM/D2801, JB/T3998 standards.
$148.00/piece
PromotionLoading...
Coupon
Model：
QAG-3
Similar products
YongLiDa QAG-3 Leveling TesterSPEC
YongLiDa QAG-3 Leveling TesterDetails
YongLiDa QAG-3 Leveling TesterPacking list
- SKU
- NB042249
- WFT
- 250 ~ 4000μ m
- Overall Dimensions
- Frame type 120x22x20mm (L x W x H)
- groove depth
- 250-500-1000-2000-4000µm
QAG-3
Leveling Tester
Coating range 250-4000um; Dimension groove 120 * 22 * 20mm; stainless steel material; in line with ASTM/D2801, JB/T3998 standards.
Introduction to QAG-3 Leveling Tester
Yonglida QAG-3 Leveling Applicator is used to test the relative leveling of liquid coatings in the laboratory, that is, the ability of coatings to eliminate surface defects during the drying process. The coating thickness of QAG-2 Leveling Applicator is 250~400μm, which complies with the international standard ASTM D2801 and JB/T3998-1999.
Display of QAG-3 Leveling Applicator
FAQ
QWhere is this levelling tester mainly used?
A
Mainly used for laboratory coating research and development and quality control, such as paints, paint manufacturers test product leveling to ensure that the coating surface is smooth and flawless, to avoid defects such as orange peel and brush marks.
QWhat specific application scenarios is this levelling tester suitable for?
A
It is suitable for coating development and quality control scenarios, such as testing the levelling performance of liquid paints, varnishes, etc., to ensure that the coating surface is smooth and defect-free, in accordance with ASTM D2801 and JB/T3998-1999 standards.
Knowledge