KairDa NDT230S+ Roll Hardness Gauge brochure

Related products

KAIRDA NDT681 digital ultrasonic flaw detection (UFD) instrument PDF report 640 * 480 resolution
0~15 meters (steel medium shear wave) transmission 30 meters (standard model); 0~20 meters (steel medium shear wave) transmission 40 meters (high performance model)100~15000m/s (standard model); 100~20000m/s (high-performance model)20~2000Hz

¥7000.0
SE
KAIRDA NDT151P Roughness Gauge
Ra、Rz、Rq、Rt、Rmax、Rc、Rp、Rv、R3z、R3y Rz(JIS)、Ry(JIS)、Rs、Rsk Rku、Rsm Rmr、RPc Rk、Rpk Rvk、Mr1、Mr2、TP、Rm1、Rm2、Rm3、Rm4Z-axis (vertical) 320μm (12600μin); X-axis (horizontal) 17.5mm (0.71inch)Z-axis (vertical) 0.001 μm/+/- 20 μm 0.002 μm/+/- 40 μm; 0.004 μm/+/- 80 μm 0.008 μm/+/- 160 μm

¥4800.0
SE
Roughness Gauge measurement platform KAIRDA KA520 swirling/spinning Roughness Gauge measurement platform
Measurement Platform

SE
KAIRDA NDT280 + Portable Leeb Hardness Tester metal shell color screen
HLD (170-960) loyal HRC (30.6-102.6) loyal HRC (17.9-69.5) loyal HB (19-683) loyal HV (80-1042) loyal HRA (59.1-88) loyal HRB (13.5-101.7)Any (360 °)Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile cast iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel

¥1550.0
SE
KAIRDA NDT361 Penetrable coating Thickness Gauge 0.15-20 mm
0.15mm~ 20mm (steel) (single crystal probe)0.001mm15MHz

¥6500.0
SE
Leeb Hardness Tester Impact device (probe) KAIRDA G-type measurement of heavy and rough surface casting and forging
90mJ20.0g1600HV

SE
KAIRDA HT5 (0~350 ℃) Ultrasonic Thickness Gauge Probe, High Temperature Resistant
probe

SE
Roughness Gauge Probes (Sensors) KAIRDA KS120 Small Hole Probe
Small hole probeRoughness of the inner surface of the hole with an aperture greater than 2mm can be measured, the maximum depth is 9mm, and the plane and cylinder can also be measured

SE
Hardness test of roll Shore Hardness Gauge KAIRDA NDT290S cast steel roll, forged steel roll, cast iron roll
30 ~ 110HS170 ~ 960HLD19 ~ 651HB13 ~ 100HRB17 ~ 68.5HRC59 ~ 85HRA80 ~ 976HVAny (360 °)Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel, cast steel rolls, forged steel rolls, cast iron rolls

SE
Surface roughness Tester KAIRDA NDT110 Metal and Non-metallic parts surface roughness testing instrument
digital displayRa、Rz、Rq、RtRa、 Rq: 0.05μm ~ 15μm RzRt: 0.1μm ~ 50μm

SE

Recommended for more brochure