Duban DB22-CM212B Split type coating Thickness Gauge brochure

Related products

DUBAN DB22-VM260A20 Vibrator, circumferential displacement D 0.001~ 20.0mm
Displacement D: 0.001~ 20.0mm (peak-to-peak P-P); Speed V: 0.01~ 2000.0mm/s (true RMS); Acceleration A: 0.1~ 2000 m/s ² (peak P); Frequency: 1~ 20,000HzDisplacement D: 5Hz~ 1KHz; Speed V: 5Hz~ 1KHz; Acceleration A: 5Hz~ 10KHzTemperature: 0~50 ℃; Humidity: < 90%

¥4420.0
SE
DB30-6226I pulse sound level meter, pulse decibel level 2
Φ12.7mm (1/2 ") test condenser microphoneA Weighting, C Weighting, Lin (linear)20Hz-8kHz

¥2600.0
SE
DUBAN DB10-2000 Wet Film Comb WFT gauge 25~ 2032µm
polygon25~2032µmGB/T1764-79、GB/T134522-92、ISO2808-74

¥200.0
SE
DUBAN DB22-TM275 Transmittance meter Transparent or translucent material light transmitance measurement
0.0%-100.0%% beam of light transmission<30mm

¥2145.0
SE
DUBAN DB25-207FM-1KN Integrated Force Gauge Built-in push-pull force meter
±100kgf;±100000gf;±4980N;±220Lbf0.01kgf;0.1N;0.1LbfLevel 0.2

¥2574.0
SE
DUBAN DB20-LX-T10 Spinning & weaving Hardness Gauge
Hardness/Average/MAX MaximumSpherical 10mm φThe curved end of the probe is used for bobbins with a diameter of less than or equal to 400mm, and the flat end of the probe is suitable for bobbins with a diameter greater than 400mm

¥2574.0
SE
DUBAN DB25-204FM-50N Integrated Force Gauge Newton Push-pull Tester
±5kgf；±5000gf；±49N；±11Lbf0.001kgf；1gf；0.01N；0.001LbfLevel 0.5

¥1144.0
SE
DUBAN DB25-204FM-10N Integrated Force Gauge Force Gauge
±1kgf；±1000gf；±9.8N；±2.2Lbf0.001kgf；1gf；0.01N；0.001LbfLevel 0.5

¥1144.0
SE
DUBAN DB22-TM240T3 Penetrating coating Ultrasonic Thickness Gauge
Two Operating Modes of thickness measurement, single point mode and scan modeLCD with backlightEcho mode: 3mm~ 30mm Pulse echo mode: 1.00mm~ 300mm (steel)

¥2288.0
SE
DUBAN DB22-SRT232 Surface Roughness Tester
GB/T6062,1S04287,DIN4768,JIS B,ANS146.1Ra,RzRa;0.05~10.00μm /1.000~400.OμinchRz:0.020~100.0μm /0.780~4000μinch

¥6864.0
SE

Recommended for more brochure