China

CHINA NBC-7128 finished shoe bending testing machine

SE
The number of tests can be set, and the machine will automatically stop when it reaches the set value. In any static state, the machine will automatically slow back to the starting position and stop automatically.
$1944.00/set
PromotionLoading...
Coupon
Model：
Contact
Details SPEC Con VIDEO CAT
Similar products

Factory NBC-7128 Finished shoe bending test machineSPEC

Factory NBC-7128 Finished shoe bending test machineDetails

Factory NBC-7128 Finished shoe bending test machinePacking list

SKU
NB044568
number of specimens
4 shoes
Test direction
Simultaneous testing of 4 specimens
Bending angle
Adjustable from 0 ° to 90 °
Test speed
0~140 +/- 5 times/min (adjustable)
Specimen size
Finished shoes are tested whole
Counter
LCD 0-999999 times 6-digit display
Machine size
1000Mm × 780mm × 700mm (length × width × height)
Weight
About 150kg
Rated Voltage
AC~220V 50HZ
NBC-7128
Finished shoe bending test machine
The number of tests can be set, and the machine will automatically stop when it reaches the set value. In any static state, the machine will automatically slow back to the starting position and stop automatically.
CHINA NBC-7128 finished shoe bending testing machine Picture

Introduction

The finished shoe bending resistance testing machine (from the heel) is used to test the bending resistance of finished shoes and soles. After the shoes and soles are bent at a certain angle by this machine for a certain number of times, the damage to the shoes and soles is observed, or cracks are inspected. and degree to improve quality. The number of tests can be set, and it will automatically stop when the set value is reached. In any stationary state, the machine automatically returns to the starting position slowly and stops automatically.

Standards compliant

This machine complies with SATRA-TM92 standard.


FAQ
QI want to test the bending performance of the finished shoes, which instrument should I choose?
A NBC-7128 finished shoe bending test machine is specially designed for the bending resistance test of finished shoes and soles. It can test 4 shoes at the same time. The bending angle is adjustable from 0 to 90 degrees, which fully meets the requirements of SATRA-TM92 standard.
QWhat scenarios is this bending test machine mainly used in?
A It is mainly used in the quality inspection process of footwear manufacturing enterprises. For example, when developing new shoes to verify the durability of sole materials, or in mass production to conduct random inspection of finished shoes, by simulating the bending action of actual wear, timely detection of cracking problems of upper and sole can help enterprises improve production processes.
Knowledge
Standard
Filter Brand Store Contact