RDS 12 #1/4 "wire-wound coating rod film thickness 27.4μm Wire diameter 0.30mm
SEWinding process, Wire diameter 0.30mm, rod diameter 6.35mm, the main rod and steel wire are stainless steel, imported RDS Proofing rod can film 27.4μm.
$155.00/piece
PromotionLoading...
Coupon
Model：
12# 1/4
Similar products
-
RDS 12 #3/8 "Mayer Rods WFT 27.4μm Length 400mm$ 161.00SE -
Japan OSP-30/400 Spreader roller WFT 30μm length 400mm$ 172.00SE -
RDS 12 #1/2 "Applicator rod film thickness 27.4μm Wire diameter 0.30mm$ 179.00SE -
RDS 12 #1/4 "Applicator rod film thickness 27.4 μm rod diameter 6.35mm$ 155.00SE -
RDS 12 #1/2 "Molded Mailer Rod, Manual Spreader Rod WFT 27.4 μm$ 179.00SE
RDS 12# 1/4 Applicator rod 1/4SPEC
RDS 12# 1/4 Applicator rod 1/4Details
RDS 12# 1/4 Applicator rod 1/4Packing list
- SKU
- NB004477
- Production process
- wire-wound
- WFT
- 27.4μm
- diameter
- 6.35mm
- Total length
- 400mm
- application width
- 300mm
- Grip Width
- 50+50mm
- material
- stainless steel
- Wire diameter
- 0.30mm
- principle
- Through different grooves, ink control is applied to film, paper and other substrates by roller painting and scratch coating. Universal for high-precision wire-rod film applicators.
- function
- Coating is used to uniformly coat the surface of the substrate to form a flat, uniform thickness coating.
12# 1/4
Applicator rod 1/4
Winding process, Wire diameter 0.30mm, rod diameter 6.35mm, the main rod and steel wire are stainless steel, imported RDS Proofing rod can film 27.4μm.
 |  |  |
The RDS wire rod coater can be said to have a long history. 80 years of industry experience have already made its technology and precision reach a higher level, and it has also had a great influence on related industries that require coating film preparation samples. RDS Wire Bar Coaters are widely used in more than 50 subdivision industries, and are also used in experimental research by many domestic (CN) researchers and published related papers. U.S. RDS#12 wire Bar Coater can coat a film with a wet film thickness of 27.4 microns, a full length of the bar of 400 mm, and a coating width of 30 mm.
Optional
 |
|
 |  |
Note: Click on the accessory picture to view Details.
FAQ
QRDS12 scraping stick? 1/4, what is the difference between formed and wire-wound?
A
For details, please refer to the NBchao article, which specifically addresses this issue.
QIs this film bar suitable for pigment prepative?
A
Applicable.
QIs the RDS No. 12 Spreader stick 500mm long?
A
Hello, no, it is generally 400mm long, and those beyond 400mm need to be customized.
QDo you support customization? Such as wet film thickness and length?
A
Spreader rod length and main rod diameter support customization, but wet film thickness RDS has provided dozens of specifications covering more than 200 microns, and in principle does not accept customization.
QHelp me find a film scraper that meets the ASTMD4147 standard
A
This 12 #1/4 "film scraper is fine!
QOur company is a solar backplane, the laboratory needs to use a scraper, want to consult, want to achieve the film thickness in our mind, how to choose the rod number, no thickness of dry film can not refer to ah, before using the rds6 scraper, coated with a thickness of dry film is 4 microns, if I want to reach 6 to 8 microns, can you suggest?
A
It can be roughly calculated according to dry film = wet film × solid parts. The wet film of RDS No. 6 rod is 13.7 μm, and the solid content is about 29% by calculation. If you want to make 6 μm and 8 μm dry films, you need to scrape the wet film 20.5 microns and 27.4 microns, which corresponds to RDS rod, which can be close to RDS 9 #and RDS 12. Thank you for your consultation.
Knowledge
- 1Bar Spreader Technology: Principles, Applications and Advantages over Miscellaneous coating methods
- 2Application of Mayer Rods in composite coating prepative
- 3Advantages and disadvantages of Mayer-Rod
Standard