KairDa TSTU32 Probe (large range) brochure

• 
  Surface Finish Meter KAIRDA NDT120 Surface Finish Meter is suitable for a variety of surface finish inspections

  digital displayRa、Rz=Ry(JIS)、Rq、Rt=Rmax、Rp、Rv、R3z、R3y、RzJIS、Rs、Rsk、Rku、Rsm、RmrRa: 0.005µm ~ 16.00µm

  SE
• 
  Roughness Gauge measurement platform KAIRDA KA520 swirling/spinning Roughness Gauge measurement platform

  Measurement Platform

  SE
• 
  Roughness Gauge Probes (Sensors) KAIRDA KS131 Deep Groove Probe

  Deep groove probeIt can measure grooves with a groove width of more than 3mm and a groove depth of less than 10mm; or the surface Roughness of steps with a height of less than 10mm, and can also measure planes and cylinders.

  SE
• 
  KAIRDA N07 Ultrasonic Thickness Gauge Probe for thin wall and small arc measurement

  0.75~80.0mmF15 * 2mmF6mm

  SE
• 
  KAIRDA HT5 (0~450 ℃) Ultrasonic Thickness Gauge High Temperature Probe

  3.0~200mm30mmprobe

  SE
• 
  Leeb Hardness Tester Impact device (probe) KAIRDA type C measurement small thin parts and surface hardening layer

  2.7mJ3.0g1600HV

  SE
• 
  KAIRDA NDT161 surface roughness Tester, contact asperity Tester

  Z axis (vertical): 320μm (-160μm~ 160μm)/Ra (0.005-32um) Rz (0.02-320); X axis (horizontal): 17.5mm (0.69inch)0.002μm/±20μm；0.004μm/±40μm；0.008μm/±80μm；0.02μm/±160μmRa、Rz、Rq、Rt、Rc、Rp、Rv、R3z、R3y、Rz(JIS)、Ry、Rs、Rsk、Rku、Rmax、Rsm、Rmr、Rpc、Rk、Rpk、Rvk、Mr1、Mr2

  ¥6050.0

  SE
• 
  Handheld Leeb Hardness Tester KAIRDA NDT280 Metal shell Durable Hardness Gauge

  30 ~ 110HS170 ~ 960HLD19 ~ 651HB13 ~ 100HRB17 ~ 68.5HRC59 ~ 85HRA80 ~ 976HVAny (360 °)Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel

  SE
• 
  KAIRDA NDT230 + Leeb Hardness Tester

  HLD (170-960) loyal HRC (30.6-102.6) loyal HRC (17.9-69.5) loyal HB (19-683) loyal HV (80-1042) loyal HRA (59.1-88) loyal HRB (13.5-101.7)Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile cast iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel2.4 inch full Viewing Angle TFT liquid crystal

  ¥1380.0

  SE
• 
  Roughometer 90 degree adapter KAIRDA KS90

  90 degree adapterLateral displacement measurement

  SE

• 1ElektroPhysik MiniTest 7200 FH4(9mm) Wall Thickness Gauge host brochure
• 2DAKOTA F-000-7102 delayed block brochure
• 3Ipre PRUT310 Ultrasonic Thickness Gauge brochure
• 4Defelsko B Advanced 200B3-E Ultrasonic Thickness Gauge brochure
• 5DAKOTA F-000-7103 delayed block brochure
• 6LANDTEK brochure
• 7Defelsko Standard UTGC1-E Ultrasonic Thickness Gauge brochure
• 8AMITTARI AT-140S Speed of sound brochure
• 9DAKOTA PZX-7 High Precision Ultrasonic Thickness Gauge brochure
• 10LANDTEK TM8812C Ultrasonic Thickness Gauge brochure