SMART SENSOR AR944M Underground metal Detector Manual,OI

Related products

QIWEI QW-GC400 blue light glue cutting machine, glue cutting instrument 400nm
400nm105*163mmDouble side LED Light source

¥860.0
SE
CHINA ZY-KGZ-2S Double station pattern rapid drying device
≦200mm-0.092~-0.098MPa80~120 liters/min

¥30000.0
SE
DUBAN DB25-ATP-A5 ATP Fluorescence Bacteria Detector (Standard)
1X1015mol ATP (standard type)≤1.0 CFU/ml0RLU~ 9999 RLU (relative luminous unit)

¥2145.0
SE
DUBAN DB25-ATP-A6 ATP Fluorescence Bacteria Detector (High Sensitivity)
1X10-16mol ATP (high sensitivity type)≤1.0 CFU/mlORLU~ 9999 RLU (relative luminous unit)

¥3432.0
SE
DUBAN DB22-DT237PC Intelligent Rotation speed meter
LCD backlight displayLaser: 2.5-99, 999 r/min; Contact: 0.5-19, 999 r/min; Linear velocity: 0.05-1999 m/min; 0.2-6560 ft/min50~250Mm (typical) up to 600mm depending on luminance

¥1560.0
SE
CHINA NBC-YX-4030 manual two-dimensional imaging instrument, workpiece defect detection 400 × 300mm
400×300mm150mm460×360mm

¥26980.0
SE
AMITTARI FM-210V10 Portable Flow Meter 0.01-10 m/s
V = KN/T + C (m/s) (automatic calculation)K: 0.0500、C: 0.0100FM-210V5(0.01-10.00 m/s)

¥3680.0
SE
LANDTEK WA-60A Water Activity Meter
6-Digit backlit LCD digital display, (3-digit humidity aw, 3-digit temperature display)0~1.0aw±0.01aw

¥3510.0
SE
DZDR-AS transient method thermal conductivity Tester, transient plane heat source method
0.0001—50W/(m*K)-40 ℃ - 200 ℃ (expandable)High Accuracy probe 2, optional anti-magnetization probe

SE
Leakage marking Tester (touch screen) pure platinum electrode purchased separately
≥ 0.5 cubic meters with Glass observation doorThe test Voltage is adjustable between 100 and 600V, and when the short-circuit current is 1A +/- 0.1A, the Voltage drop should not exceed 10%. When the short-circuit leakage current in the test circuit is equal to or greater than 0.5A, the time is maintained for 2 seconds, and the relay operates., cut off the current, indicating that the test product is unqualified.The rectangular platinum plated electrode is used, and the force of the two poles on the sample is 1.0N +/- 0.05N respectively

¥11000.0
SE

Recommended for more manual