China

Chengyue CY-VPS500-3GN vacuum pyrolysis lame plating machine, three nozzles, vacuum pyrolysis system

SE
Equipped with three nozzles synergy system and vacuum system, support 5000Pa basic vacuum degree and 500 ℃ high temperature control, high-precision peristaltic pump and stepper motor moving mechanism to achieve multi-layer film preparatory.
$34271.00/set
PromotionLoading...
Coupon
Certificate
Contact
Details SPEC Con CAT

ChengYue CY -VPS500-3GN Vacuum pyrolysis lame plating machineSPEC

ChengYue CY -VPS500-3GN Vacuum pyrolysis lame plating machineDetails

ChengYue CY -VPS500-3GN Vacuum pyrolysis lame plating machinePacking list

SKU
NB045912
supply Voltage
AC220V,50Hz
maximum temperature
500℃
Spray booth
690×690×790mm
Temperature control mode
Al-PID temperature control
Atomization head
High Voltage air atomization nozzle X3 Each nozzle is equipped with a high Voltage gas drive baffle to prevent dripping
pressure regulator
Adjustable compressed air intake
Maximum Power
3.5KW (including compressor + peristaltic pump about 1.5KW)
liquid viscosity
1-50mPa·s(cP)
Nozzle stroke
X-Y axis up to 180mm
Traverse speed
0-250Mm/s (x-axis direction) 0-250mm/s (Y-axis direction)
Heating substrate substrate
200×200mm
Drip coating tank Capacity
50mL/250mL/50mL (with three jars, one large, two small)
Peristaltic pump liquid separation rate
0.006-41mL/min
Vacuum pump
Two-stage rotary vane vacuum pump
vacuum gauge
Mechanical vacuum gauge
Ultimate Vacuum
≤5000Pa
Control method
Industrial control computer + instrument panel
Machine size
900×900×1750mm
CY -VPS500-3GN
Vacuum pyrolysis lame plating machine
Equipped with three nozzles synergy system and vacuum system, support 5000Pa basic vacuum degree and 500 ℃ high temperature control, high-precision peristaltic pump and stepper motor moving mechanism to achieve multi-layer film preparatory.
Chengyue CY-VPS500-3GN vacuum pyrolysis lame plating machine, three nozzles, vacuum pyrolysis system Picture

Introduction

The spray pyrolysis method is to atomize the solution and spray it onto the heated base, and then obtain the desired material structure on the substrate. CY-VPS500-3GN Vacuum Pyrolysis Spraying Machine adds a multi-nozzle coordination system and a vacuum system on the basis of ordinary pyrolysis spraying, it is equipped with three high-pressure gas-driven atomizing nozzles and a matching anti-drip baffle, which can work together through the touch screen to make multi-layer films. The vacuum system is capable of providing a basic vacuum of 5000Pa, which can be spray pyrolysis in a protective gas environment after being filled with inert gas. In addition, this instrument also has a high-precision peristaltic pump and a precision-programmed stepper motor moving mechanism, and the substrate temperature can also be controlled, which can meet your various test needs.

Scope of application

It is widely used in the preparation of perovskite solar cells.

FAQ
QCan this instrument do experiments in a protected gas environment?
A Yes, it has its own vacuum system, which can pump a vacuum of 5000Pa and fill it with inert gas, so that it can spray pyrolysis in an oxygen-free environment to prevent material oxidation, especially suitable for air-sensitive perovskite materials.
QHow is the lame plating control accuracy of the instrument?
A It uses a high-precision peristaltic pump and a programmable stepper motor, with a minimum liquid Flow velocity of 0.006mL/min, and the nozzle traverse speed can be adjusted to 0.25mm/s. With the anti-drip design of three nozzles, the film uniformity and Repeatability can be ensured.
Filter Brand Store Contact