Duban DB30-6228F Noise Spectrum Analyzer brochure

Related products

DUBAN DB20-SRT231 + sand blasting shot peening Surface Roughness Tester
LCD display+/- 5% or +/- 5a0.1 μm (Measured value < 100 μm)

¥2860.0
SE
DUBAN DB25-ATP-A5 ATP Fluorescence Bacteria Detector (Standard)
1X1015mol ATP (standard type)≤1.0 CFU/ml0RLU~ 9999 RLU (relative luminous unit)

¥2145.0
SE
DUBAN DB25-ATP-A6 ATP Fluorescence Bacteria Detector (High Sensitivity)
1X10-16mol ATP (high sensitivity type)≤1.0 CFU/mlORLU~ 9999 RLU (relative luminous unit)

¥3432.0
SE
DUBAN DB10-4222 Handheld Acoustic calibrator Class 2
94dB and 114dB (based on 20µPa)Level 21000 + 0.1% Hz (thus correcting on A, B, C, D or Linear Frequency Weighting)

¥1040.0
SE
DUBAN DB22-TM240T3 Penetrating coating Ultrasonic Thickness Gauge
Two Operating Modes of thickness measurement, single point mode and scan modeLCD with backlightEcho mode: 3mm~ 30mm Pulse echo mode: 1.00mm~ 300mm (steel)

¥2288.0
SE
DUBAN DB22-TM271D Measurement range 0.00 OD - 6.00 OD
±2% (1% -- 100%)0.00 OD - 6.00 OD0-- 100%

¥3718.0
SE
DUBAN DB25-204TM-1Nm Handheld Torque Gauge with three-jaw chuck 0.6mm-6mm as standard
±0.1kgf.m/±100gf.m/±1N.m/±0.22Lbf.m0.001kgf/1gf/0.01N/0.001Lbf0.6mm-6mm

¥2860.0
SE
DUBAN DB22-VM260A08 Vibrator, displacement D 0.001~ 8.0mm
Displacement D: 0.001~ 8.0mm (peak-to-peak P-P); Speed V: 0.01~ 800.0mm/s (true RMS); Acceleration A: 0.1~ 800 m/s ² (peak P); Frequency: 1~ 20,000HzDisplacement D: 5Hz~ 1KHz; Speed V: 5Hz~ 1KHz; Acceleration A: 5Hz~ 10KHzTemperature: 0~50 ℃; Humidity: < 90%

¥2860.0
SE
DUBAN DB25-204TM-20Nm Handheld Torque Gauge with three-jaw chuck 3mm-16mm as standard
±2kgf.m/±2000gf.m/±20N.m/±4.4Lbf.m0.001kgf/1gf/0.01N/0.001Lbf3mm-16mm

¥3432.0
SE
DUBAN DB20-LX-O Shore Durometer R1.2/822gf Soft Rubber
0.1H≤1H<20DO

¥2002.0
SE

Recommended for more brochure