Duban DB25-204SPT 10KN Ponzi tensioMeter brochure

Related products

DUBAN DB25-207FM-50KN Split Force Gauge External Push-pull Force Tester
±5000kgf;±49000N;±11000Lbf0.01kgf (<100kgf),0.1kgf (≥100kgf);0.1N (<1000N),1N (≥1000N);0.1Lbf (<1000Lbf),1Lbf (≥1000Lbf)Level 0.2

¥4290.0
SE
DUBAN DB22-TM273 Integrated Multifunctional Transmittance meter
0~100%0.1±2%

¥2145.0
SE
DUBAN DB25-204G Grain feed pellet durometer
0Kgf-20Kgf,0N-196N,0F-4426F0.01Kgf0.1N,0.0126F1 5mm

¥2574.0
SE
DUBAN DB22-VM260A20 Vibrator, circumferential displacement D 0.001~ 20.0mm
Displacement D: 0.001~ 20.0mm (peak-to-peak P-P); Speed V: 0.01~ 2000.0mm/s (true RMS); Acceleration A: 0.1~ 2000 m/s ² (peak P); Frequency: 1~ 20,000HzDisplacement D: 5Hz~ 1KHz; Speed V: 5Hz~ 1KHz; Acceleration A: 5Hz~ 10KHzTemperature: 0~50 ℃; Humidity: < 90%

¥4420.0
SE
DB25-207FM-20KN Split Force Gauge External Thrust Tensile Tester
±2000kgf;±9999N;±4400Lbf0.01kgf (<100kg),0.1kgf (≥100kgf);0.1N (<1000N),1N (≥1000N);0.1Lbf (<1000Lbf),1Lbf (≥1000Lbf)Level 0.2

¥3432.0
SE
DUBAN DB20-LX-T5 Spinning & weaving Hardness Gauge
Hardness/Average/MAX MaximumSpherical 5mm φThe curved end of the probe is used for bobbins with a diameter of less than or equal to 400mm, and the flat end of the probe is suitable for bobbins with a diameter greater than 400mm

¥2574.0
SE
DUBAN DB22-TM240T3 Penetrating coating Ultrasonic Thickness Gauge
Two Operating Modes of thickness measurement, single point mode and scan modeLCD with backlightEcho mode: 3mm~ 30mm Pulse echo mode: 1.00mm~ 300mm (steel)

¥2288.0
SE
DUBAN DB25-207FM-10KN Split Force Gauge External Thrust-Tensile Force Tester
±1000kgf;±9800N;±2200Lbf0.01kgf (<100kg),0.1kgf (≥100kgf);0.1N (<1000N),1N (≥1000N);0.1Lbf (<1000Lbf),1Lbf (≥1000Lbf)Level 0.2

¥3218.0
SE
DUBAN DB22-FPM12KBAT Stroboscope, Battery 50-12000FPM
5-Position 10mm LCD display0.1FPM (below 1000 FPM); 1FPM (above 1000 FPM)50~12000 FPM

¥1950.0
SE
DUBAN DB20-LX-O Shore Durometer R1.2/822gf Soft Rubber
0.1H≤1H<20DO

¥2002.0
SE

Recommended for more brochure