China

HUITAO HT-D270 Carpet Caster Wear resistance Tester meets a variety of standard foot wheel, automatic lift

SE
In line with EN425 and other international standards, the foot wheel can be automatically lifted and equipped with infrared protection devices, the test table and the foot wheel share the motor to ensure the same Rotation speed, the height of the vacuum device is automatically adjusted.
$6903.00/set
PromotionLoading...
Coupon
Model:
Certificate

huitao HT-D270 Carpet casters Wear resistance TestersSPEC

huitao HT-D270 Carpet casters Wear resistance TestersDetails

huitao HT-D270 Carpet casters Wear resistance TestersPacking list

SKU
NB048286
Friction method
swirl/ spin
Frictional contact form
face
Caster type
H type, W type
Caster diameter
(50±2) mm
Caster width
(20±2)mm
Caster tire face curvature radius
(130±5)mm
Test bench diameter
(800 +/- 5) mm, Thickness (7 +/- 5) mm
Rotation speed of test bench
(19 +/- 2) r/min adjustable
Rotation speed of foot wheel
(50 +/- 2) r/min adjustable
Swirl/spin platform swirl/spin duration
(180 +/- 10) s Stop bit hold duration: (5 +/- 2) s
load
90±1Kg
Air Volume of built-in vacuum cleaner
25~30L/s
noise
<75db
Operating Environment
Temperature 0~40 ℃, Relative Humidity < 80%
Power Supply
AC220V+10% 50Hz,2000W
Control system
PLC
Operating interface
Chinese and English, man-machine integration, color 7-inch touch screen
HT-D270
Carpet casters Wear resistance Testers
In line with EN425 and other international standards, the foot wheel can be automatically lifted and equipped with infrared protection devices, the test table and the foot wheel share the motor to ensure the same Rotation speed, the height of the vacuum device is automatically adjusted.
HUITAO HT-D270 Carpet Caster Wear resistance Tester meets a variety of standard foot wheel, automatic lift Picture

Meets standards

1. EN425: Resilient and Laminate Floor Coverings-CAstoria Test, wheelchair test experiment

2. GB/T 2611-2077: (General technical requirements for testing machines)

3. GB/T 5226.1-2008: (Mechanical and electrical safety -- Mechanical and electrical equipment Part 1 General technical conditions.) )

4. GB/T 38142-2019 Elastic, textile and laminated paving -- Wheelchair test;

5. ISO 4918 Elastic layered flooring fabric Foot wheelchair test;

6. ASTM D6962-12 Operating Procedures for Drum Chair Tester for Tufted Carpet;

7.NF P62-102 Resilient Floor Coverings Small Foot Wheelchair Trial;

8. DIN EN 985 Resilient floor coverings - Wheelchair test for small feet;

9. DIN EN 425 Elastic and lamellar floor coverings Foot wheelchair test;

10.JIS  L4406:2000 Tile carpet;

11. QB/T 2755-2005 Tile carpet.

Features

1Meets a variety of carpet foot wheelchair load measurement standards.

2The caster disc can be automatically raised and lowered, which reduces the danger of manual operation.

3The open design of the sample stage allows the results to be observed directly on the test bench when the experiment is stopped.

4The infrared protection device uses infrared diffuse reflective sensors to monitor the test area, and if there is a human body or foreign objects entering, the rotating caster disc and the test bench will automatically stop to avoid dangerous accidents.

5The test bench and the caster disc share the same motor drive to ensure the consistency of the relative speed and steering of the two.

6The height of the suction inlet of the vacuum cleaner is automatically adjusted according to the thickness of the carpet to ensure a good suction effect.

7It is easy to display, operate and control via touch screen.

8. The instrument design is humanized, automated and intelligent, and easy to operate. Maintenance and repairs.


FAQ
QI want to test the wear resistance of carpet casters, what instrument should I use?
A HT-D270 Carpet Caster Wear resistance tester meets more than ten international and domestic standards such as EN425, GB/T 38142-2019, can accurately simulate the swirl/spin friction of casters on the carpet, automatic lifting foot wheel and infrared protection design make the operation safer, suitable for carpet manufacturers or Quality inspection organizations to evaluate wear resistance performance.
QWhat are the common scenarios in which this instrument is used?
A The HT-D270 is commonly used in carpet manufacturers, Quality control centers, and R & D labs to test the abrasion resistance of casters for resilience, spinning & weaving, or laminated carpets. For example, when evaluating office or household carpets, it can simulate the long-term use of wheelchairs or furniture casters, helping to ensure that products are durable and meet industry standards such as ASTM D6962-12 to avoid premature abrasion.