CHINA Rgd-02/300TS Double-sided roll-to-roll automatic coating machine, double roller painting cloth belt deviation correction device
SE
Rgd-02/300TS
Factory Rgd-02/300TS Double Sided Film ApplicatorSPEC
Factory Rgd-02/300TS Double Sided Film ApplicatorDetails
Factory Rgd-02/300TS Double Sided Film ApplicatorPacking list
- SKU
- NB048491
- Spreader process
- Unwinding → double roller painting film → drying → fitting → deviation correction → winding
- Coating method
- Double roller painting film
- Thickness range
- 0.001-2mm
- Film Accuracy
- ±5%
- Graduation
- 0.001mm
- percentile
- digital display
- Coating speed
- 0~20M/min adjustable
- Unwinding outer diameter
- 300mm
- Effective application width
- ≤300mm
- Roll surface length
- 450mm
- Oven length
- 2m
- Oven Temperature range
- RT+~150℃
- winding outer diameter
- 400mm
- Effective application width
- ≤300mm
- compound speed
- 1~10m/min
- Composite Accuracy
- 0.5mm
- composite width
- 100~300Mm adjustable
- Outer diameter of winding air expansion shaft
- 3 inches.
- Winding outer diameter range
- ≤300mm
- Dimension
- 2280Mm * 680mm * 1600mm (subject to actual customization)
- Host Power Supply
- 380V/2KW
Structure of double-sided coil coating machine
The machine is composed of a body, a gluing width adjustment device, a discharging rack, a gluing roller group, a thickness adjustment dial gauge, a transmission platform, a traction roller group, and a transmission mechanism.
Introduction to the structure and composition functions
Body:The body of the equipment is all aluminum alloy + stainless steel plate.
Gluing width adjustment device:The width adjustment device consists of food-grade plastic and a movable brace.
Unwinding rack:The machine is equipped with two unloading racks, when the two materials do not deviate from the material pair in the laminating process, the deviation correction device automatically adjusts the material rack to move left and right to achieve the effect of aligning the two materials.
Transmission platform:The transmission platform is made of stainless steel, and its main function is to connect the substrate after gluing to the next process.
Traction roller set:The substrate is pulled by hand between the upper and lower rollers of the traction roller, the handwheel on the frame is tightened to make the traction roller, and the rubber ring of the upper roller is in contact with the lower roller, and the traction roller group is drawn over to the substrate by power transmission to make the coating work complete.
- 1Overview and comparative analysis of roll-to-roll coater and double-sided coater technology
- 2Automatic Film Applicator technology analysis
- 3Application and technical advantage of roll-to-roll coater in preparation of hot-melt adhesive plaster
- 4Discuss the key technologies of small roll-to-roll coater: Spreader head, roller, drive and drying
- 5Deep analysis of tension control principle of coater coil
- 6Overview of Roll-to-Roll Film Applicator Technology
- 7Technical Principle, Application and Selection of PT Film Roll-to-Roll Film Applicator
- 8Research and application of roll-to-roll coater selection technology
- 9Overview and skills of laboratory roll-to-roll coater technology
- 10Comparative Analysis of Small Spreader and Traditional Roll-to-Roll Coater