China

Patek Jushi LY-7012C Digital Display Tensile Tester 900KG

SE
Measurement accuracy +/- 0.01N, effective stroke 700mm, built-in micro printer, resolution 1/200000, used for static load, tensile, compression, bending, shearing, tearing, disbonding and other mechanical properties test.
$1936.00/set
PromotionLoading...
Coupon
Certificate
Contact
Details SPEC Con CAT

BaiDaJuShi LY-7012C 900KG Tensile TesterSPEC

BaiDaJuShi LY-7012C 900KG Tensile TesterDetails

BaiDaJuShi LY-7012C 900KG Tensile TesterPacking list

SKU
NB048609
Measurement range
900kg
Force Precision
±0.01N
force resolution
1/200000
Test speed
0~500mm/min
effective travel
700mm
Test space
100mm
Force Unit
kgf、gf、N、kN、lbf
stress unit
MPa、kPa、kgf/cm2、lbf/in2
shutdown mode
Upper and lower limit safety setting, specimen breakpoint sensing
result output
Micro printer
power
Speed regulating motor
optional
Tension fixture (conventional)
Machine Weight
80kg
Power Supply
1PH、AC220V、50/60Hz
LY-7012C 900KG
Tensile Tester
Measurement accuracy +/- 0.01N, effective stroke 700mm, built-in micro printer, resolution 1/200000, used for static load, tensile, compression, bending, shearing, tearing, disbonding and other mechanical properties test.
Patek Jushi LY-7012C Digital Display Tensile Tester 900KG Picture

Product use

Tensile testing machine is also known as universal material testing machine. Universal testing machine is used for static load, tensile, compression, bending, shearing, tearing, peeling and other mechanical properties testing of various materials. It is suitable for various physical and mechanical properties testing of plastic sheets, pipes, profiles, plastic films and rubber, wire and cable, steel, glass fiber and other materials. It is developed for materials, and is a special testing equipment for physical properties testing, teaching and research, quality control and other special testing equipment.


FAQ
QPlastic film tensile strength test which Tensile machine?
A LY-7012C single column Tensile machine is specially designed for thin film soft materials, the 900kg force value range fully covers the film testing requirements, and the accuracy of +/- 0.01N can accurately capture the force value change at the moment of film fracture.
QWire and cable testing performance, what is the appropriate equipment?
A LY-7012C is suitable for Wire and cable inspection, its 0-500mm/min wide speed range can simulate different stretching speeds, standard tensile fixture can firmly hold the cable, 1/200000 high resolution to ensure accurate recording of the force value fluctuation during stretching.
Knowledge
Standard
Filter Brand Store Contact