Taigang TG-RR300 laboratory roll-to-roll small coater small hot-melt adhesive coater
SE
TG-RR300
TaiGang TG-RR300 Laboratory roll-to-roll coaterSPEC
TaiGang TG-RR300 Laboratory roll-to-roll coaterDetails
TaiGang TG-RR300 Laboratory roll-to-roll coaterPacking list
- SKU
- NB049278
- Spreader type
- Continuous Spreader
- Applicable system
- hot-melt adhesive
- Width of guide roller
- 330mm
- substrate width
- Max.300mm
- application width
- 0-280Mm, adjustable through baffle
- Mechanical speed
- 5m/min
- Spreader thickness
- Continuous Spreader minimum thickness on one side: 0.01mm (depending on the slurry, reference material requirements), thickness Accuracy ： ≤ +/- 5μm (excluding edge abnormal areas, see product evaluation for sampling measurement standards)
- Drawdown blade diameter
- Ф60mm
- align both sides
- +/- 0.5mm (length direction)
- box Volume
- About 0.5L
- Back roller diameter
- ≤ 80mm, roller runout ≤ 5μm
- Heating mode
- Heating rod
- heating temperature
- 0-200 degree adjustable
- rewinding diameter
- Max.Ф200mm
- Rewinding and unwinding core
- Ф76mm
Introduction
The continuous hot melt adhesive coating and laminating test machine is a laboratory mini hot melt adhesive coating and laminating machine that can be assembled with a high-precision modular coating station mechanism, and can be continuously coated and proofed or produced in small quantities. The hot-melt pressure sensitive adhesive can be applied directly to the heat-resistant substrate, or coated on the release paper and then the adhesive film can be transferred and laminated to different surface materials, such as paper, plastic model metal film, etc.
Configuration briefing
The whole machine is a high-precision modular coating station structure combined assembly.
The dial gauge is used as the indexing head to accurately fine-tune the coating gap between the upper and lower rubber wheels to control the coating thickness. The minimum gluing thickness is 0.01mm. When the thickness is set, the rubber wheel can be locked indirectly to prevent the gap from changing.
The maximum coating width is 300 mm (effective coating width 280 mm). The width is adjusted by two Teflon baffles in the tun. It can be coated and glued in unlimited lengths and automatically rewinded.
Forward and reverse stepless speed change, coating speed: 5m/min (speed 0.1-5M/MIN adjustable) The winding reel can be adjusted and the machine tension control receiving.
The warming rod, glue wheel and glue tank can be quickly disassembled and separated from the machine body to remove the residual glue.
Machine size: 1280*600*660(L*W*H)
Machine weight: about 150KG
Machine power supply: AC220V (single phase) / 50Hz machine power: 2kw