JINGKELIAN QXD (0-150um stainless steel) Fineness gauge 0~150μm/5μm
JINGKELIAN QXD0-150um stainless steel Fineness gauge is single-channe Fineness gauge, test range 0~150μm, Graduation 5μm, QXD0-150um comes standard with a scraper, made of stainless steel.
Model：
QXD 0-150
Similar products
-
TRUIT TR 1201/150 single-channe fineness gauge 0~ 150μm$ 165.00SE -
JINGKELIAN QXP 50-150μm ISO single-channe Fineness of Ground Gauge with Third Party Measurement Certificate$ 210.00SE -
Pushen ISO-150um double-channel ISO Fineness Gauge 0-150μm$ 195.00SE -
Pushen QXD-150um single-channe scraper Fineness gauge 0-150μm$ 161.00SE -
MODERNER QXD-150 single-channe Fineness gauge range 0~150 microns
JingKeLian QXD 0-150 Stainless steel Fineness gaugeSPEC
JingKeLian QXD 0-150 Stainless steel Fineness gaugeDetails
JingKeLian QXD 0-150 Stainless steel Fineness gaugePacking list
- SKU
- NB004989
- Scraper type
- Single-channe
- Number of grooves
- 1
- range
- 0 ~ 150μ m
- Scale unit
- mm
- Graduation
- 5μm
- Scraper material
- stainless steel
- Scraper size
- 155*50*12mm
- Groove size
- 13*120mm
- Scraper material
- stainless steel
- Scraper size
- 68×40×6.5mm
- Applicable standard
- GB1724-79
- Surface finish on scraper
- 10
- Chute bottom surface finish
- 8
- Scraper two edge finish
- 8
- Scraper two knife edge plane flatness
- 0.002mm
- Flat flatness on scraper
- 0.003mm
- Bottom plane flatness of chute
- 0.003mm
QXD 0-150
Stainless steel Fineness gauge
Introduction
The Fineness Meter is designed according to the standard paint inspection method promulgated by the Ministry of Chemical Industry: Fineness Meter measurement method GB1724-79, which can be used to test the fineness of pigments, fillers and impurities in paints and paint pastes, expressed in microns .
Uses: Determination of particle fineness of fuel filling and impurities in paints, varnishes and inks
FAQ
QHello, I want to test some 2um powder Fineness, which range Fineness gauge should I buy?
A
Although the range is 0-15 microns, measuring 2 microns may be more difficult to observe.
QFineness gauge can be applied to GB/T13217.3?
A
OK
QCan the QXD150 Fineness gauge detect coatings up to 130 microns?
A
Yes, the scraper fineness Measurement can scrape 0~ 150 μ m or less sample fineness.
QHow can I see the particles on the paint scraper Fineness Meter?
A
Please refer to the instructions for using the mall knowledge base.
Standard
- 1GB/T 42541-2023《Coated steel pipes for gas piping》
- 2HG/T 5175-2017《Water-based decorative coating for glass and ceramic products》
- 3HG/T 3369-2003《Micaceous ironoxide phenolic anticorrosive paint》
- 4ASTM D1316-2020《Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer》
- 5ASTM D333-2021《Standard Guide for Clear and Pigmented Lacquers》
- 6GB/T 13217.3-2008《Test method for fineness of grind of liquid ink》
- 7GB/T 17459-1998《Ductile cast iron pipe asphalt coating》