RDS #95 Mayer Rods WFT 217.2μm Length 400mm

217.2 μm wet film thickness, Spreader width is 30cm, the material is 303 wear-resistant stainless steel, molded Spreader process, rod diameter is 6.35mm, and wire-wound process is optional.

$155.00/piece

PromotionLoading...

Coupon

Model：

95# 1/4“

Certificate

RDS

Contact

Details SPEC Con VIDEO CAT OI

RDS 95# 1/4“ Applicator rod 1/4 "SPEC

RDS 95# 1/4“ Applicator rod 1/4 "Details

RDS 95# 1/4“ Applicator rod 1/4 "Packing list

SKU: NB000050

Production process: formed

WFT: 217.2μm

diameter: 6.35mm

Total length: 400mm

application width: 300mm

Grip Width: 50+50mm

material: stainless steel

95# 1/4“

Applicator rod 1/4 "

217.2 μm wet film thickness, Spreader width is 30cm, the material is 303 wear-resistant stainless steel, molded Spreader process, rod diameter is 6.35mm, and wire-wound process is optional.

RDS #95 Mayer Rods WFT 217.2μm Length 400mm Picture

The U.S. RDS#95 wire rod coater is a 1/4 inch diameter shaped coating rod. For the small RDS wire rod coater, there are two types of winding type and extrusion type, but due to the domestic (CN) market From the point of view, users rarely choose to prepare wet film thicknesses above 200 microns, and more choose wire rods with thinner wet film thicknesses. Therefore, RDS#95 only has molded coating rods for the time being, which meets the needs of some users. The need to apply thicker coating films.

RDS#95 wire rod coater operation video

Diameter Specifications of RDS#95 Wire Rod Coater

U.S. RDS#95 Wire Rod Coater Purchase Frequently Asked Questions

Different batches of RDS#95 wire Bar Coater

RDS#95 wire Bar Coater features and advantages

Real shot of RDS#95 wire rod coater

Actual shot of RDS#95 wire Bar Coater Figure 2

Real shot of RDS#95 wire Bar Coater Figure 3

Optional

Note: Click on the accessory picture to view Details.

FAQ

QWhat number of wire sticks are generally used for 23g glue? Water-based latex, 23g per square meter, that is, No. 10 stick?

A Calculated by wet film thickness calculator developed by NBchao

QDo you support customization? Such as wet film thickness and length?

A Spreader rod length and main rod diameter support customization, but wet film thickness RDS has provided dozens of specifications covering more than 200 microns, and in principle does not accept customization.

QDo you have the extruded wire rod involved in GB/T 13217.1?

A The 95 #1/4 "extrusion rod is fine.

QWhat size rod do you need for epoxy coating?

A Because the average user chooses the bar model, they are selected according to the wet film thickness of the Spreader they need. If you don't know the wet film thickness, you can also calculate it first through the following calculator http://tool.nbchao.com/mohou

Knowledge

Standard

Filter Brand Store Contact