Factory Direct Rjy-00/1000 immersion type coater dip coating double roll extrusion equipment, effective width 1000mm
SE
Rjy-00/1000
Factory Rjy-00/1000 Soaking coil coaterSPEC
Factory Rjy-00/1000 Soaking coil coaterDetails
Factory Rjy-00/1000 Soaking coil coaterPacking list
- SKU
- NB050508
- Spreader process
- Unwinding → dip coating → double roll extrusion → winding
- main substrate
- PET or other non-breakable materials
- glue
- Water-based paints, solar-based paints and Miscellaneous
- Spreader thickness range
- Adjustable according to the process (formed)
- Coating Method
- soak
- Bath size
- 1500Mm length * 1000mm width * 300mm depth (built-in circulation system, can be exchanged with external solvents to filtrate)
- Bath material
- Resistant corrosion stainless steel (note, the solution cannot react chemically with the material)
- Dip tank guide roller
- 2 sticks
- Effective application width
- Max.1000mm
- substrate
- Less than 1000mm
- Roll surface width
- 1000mm
- Extrusion unit - extrusion method
- Double roll extrusion
- Extrusion Unit - Adjustable Range
- 0.3-10mm
- Extrusion Unit - Spreader Adjustment
- Handwheel adjustment, dial indicator display
- Mechanical speed
- 1.2M/min (0.1~ 1m/min production speed, depending on the process) The speed can be adjusted slowly
- unwinding diameter
- ≤ φ 400mm (paper core 3 ")
- winding diameter
- ≤ φ 500mm (paper core 3 ")
- Reel the edges neatly
- ±3.0mm
- Total Installed Power
- About 5kW (subject to actual customization)
- Machine size
- (L x W x H) According to process changes and final design drawings
- Teflon roller
- 4 pieces (installed in front of the Spreader head)
- Power supply Voltage
- Three-phase five-wire 380V 50Hz
- Unwinding Unit - Type
- Single station
- Effective unroll width
- 1000mm
- Effective unwinding diameter
- ≤Φ400mm
- Unwinding Unit - Unwinding Scroll
- 3 " (φ 76mm) 1 piece of inflatable shaft (suspended wall structure)
- Unwinding Unit - Unwinding Tension Control
- Automatic tension control, magnetic particle brake, tension Controller
- Front Traction Unit - Steel Roller
- Φ42x1000mm
- Front Traction Unit - Motor
- SEND/0.75KW (servo control)
- conclusion
- 1 meter bearing platform
- size
- About L5000mm x W1300mm x H1500mm (Note: subject to actual customization)
- Weight
- About 1t (subject to actual customization)
This machine is mainly suitable for coating (immersion bath) production winding equipment for roll substrates
Equipment process
Unwinding→ dipping (built-in glue circulation system) → double roller extrusion → pull-out load-bearing platform (1 meter)
Main part configuration
(1) Unwinding unit (1 set in total)
Structural features:
Type: Single station
Effective unwinding width: 1000mm
Effective unwinding diameter: ≤φ400mm
Unwinding shaft: 3" (Φ76mm) inflatable shaft 1 piece (suspended wall structure)
Unwinding tension control: automatic tension control, magnetic particle brake, tension controller
Specifications:
Main configuration of unwinding:
Magnetic powder brake:
Tension Controller:
Inflatable shaft: 3"/cantilever (winding part)
(2) Front traction unit
Structural features:：
1. Double roller roller structure, rigid and flexible combination
2. Steel roller: Φ42x800mm, surface plated with hard chrome, super fine grinding;
3. Rubber roller: Φ60x800mm: Shaw (A) 70~75°, silicone material, pneumatic solenoid valve control adjustment, pressureadjustable(No need to install rubber rollers)
Specifications
Main traction configurations:
Steel roller: Φ42x800mm
Motor: SEND/0.75KW (Servo Control)