Huino JDH - 0.4/300 uvb lcl ak small multifunctional coil coater comma scraper Spreader width ≤ 300mm
Using continuous comma scraper Spreader process, Spreader Film thickness can be accurately adjusted to 0.01mm~ 2mm, film accuracy of +/- 0.003mm. Support trough heating (RT +~ 200 ℃) and multi-group tension control, adapt to a variety of Spreader materials and substrates, compact structure.
$16987.00/set
PromotionLoading...
Coupon
Model：
JDH-0.4/300uvblclak
HuiNuo JDH-0.4/300uvblclak Small multifunctional coil coaterSPEC
HuiNuo JDH-0.4/300uvblclak Small multifunctional coil coaterDetails
HuiNuo JDH-0.4/300uvblclak Small multifunctional coil coaterPacking list
- SKU
- NB050873
- Process flow
- Unwinding → Scratching (heating in the trough) → Laminating → Unwinding
- Spreader mode
- continuous scratch coating
- Effective Spreader Width
- ≤ 300mm, adjustable through baffle
- Spreader mode
- Scratch (comma scraper)
- Spreader roller diameter
- Ф50mm
- Spreader roll accuracy
- Straightness, roundness, coaxiality, runout < 0.002mm Ra0.05
- Spreader Film thickness range
- 0.01mm~2mm
- Film thickness
- 0.01Mm (depending on the slurry, refer to the material requirements)
- Coating surface density
- ≤ +/- 1.5% (including substrate, excluding edge anomalies)
- Spreader rate
- 2~ 4.5M/min forward and reverse stepless transmission
- Drive motor
- Asynchronous induction motor
- Film accuracy
- +/- 0.003mm (depending on slurry, reference material requirements)
- Regulator resolution
- 0.001mm
- Indication display
- digital display
- Heating device
- trough heating
- Heating method
- Heating rod
- Temperature range
- RT+~200℃
- box volume
- About 0.5L
- Width of guide roller
- 300mm
- substrate width
- Max.300mm
- Back roller diameter
- Ф150mm
- Reel diameter
- 3 inches.
- rewinding diameter
- Unwinding Max. < unk > 400mm; Unwinding Max. < unk > 600mm
- Tension controller
- Unwinding control × 2; unwinding control × 1
- Applicable materials
- Lithium battery, glue, silicone oil, UV, inks, cataplasm, hot-melt adhesive, gel, plaster, slurry, etc
- Applicable substrate
- Paper, film, aluminum foil, plastic, non-woven fabric, etc
- Machine power
- 2000W
- Host power supply
- AC220V (single phase) 50Hz
- Machine size
- 1624 * 635 * 750mm (subject to actual customization)
- Machine weight
- About 120kg (subject to actual customization)
- correction module
- /
- power
- 150w
- reaction time
- 4ms
- function
- Real-time display of material deviation
- processor
- Main frequency 48MHz
- Sensor
- Ultrasonic Sensor
- wide
- 300mm
- UV curing module
- /
- UV curing area
- Length 500mm * 300mm
- UV curing lamp source
- 365Nm wavelength mercury lamp/LED (the height of the lamp source is adjustable, the height range: 5cm~ 30cm)
- UV curing time
- Max.5min
- Tunnel oven module
- /
- Temperature range
- RT~200℃
- Heating system
- Infrared tube heater + centrifugal blower + PT100 thermistor
- Temperature control algorithm
- PID control algorithm
- Chill down module
- /
- Chill down
- Stainless steel roller contact chilling down
- Heat medium
- Pumping circulating water
- Heat dissipation method
- Fan cooling chilled down
- Ion wind static removal module
- /
- ion generation mode
- Corona discharge, pulsed AC
- output voltage
- 7.2KV
- compressed air pressure
- 30-75psi
JDH-0.4/300uvblclak
Small multifunctional coil coater
Using continuous comma scraper Spreader process, Spreader Film thickness can be accurately adjusted to 0.01mm~ 2mm, film accuracy of +/- 0.003mm. Support trough heating (RT +~ 200 ℃) and multi-group tension control, adapt to a variety of Spreader materials and substrates, compact structure.
Product Introduction
JDH-0.4/300uvblclak small multi-functional coil coating machine adopts unwinding→ scraping (trough heating) → lamination→ winding continuous comma scraper coating process, effective coating width ≤ 300mm, coating thickness can be accurately adjusted to 0.01mm~2mm, coating roller accuracy and coating accuracy up to <0.002mm, ±0.003mm respectively, with digital display adjustment (resolution 0.001mm) and multiple sets of tension controllers, coating rate 2~4.5m/min Forward and reverse continuously variable speed. The equipment supports trough heating rod heating (temperature control RT+~200°C), adapts to a variety of coating materials such as lithium battery paste, glue, ink, and paper, film, aluminum foil and other substrates, is equipped with ultrasonic sensors to display deviations in real time, and the whole machine is powered by AC220V single-phase, with a size of 1624635750mm and a weight of about 120kg, which is compact and can meet the needs of multi-scene small coil coating.
FAQ
QWe want to find a full-featured desktop coater. In addition to Spreader, it is best to have UV curing and stoving functions. Do you have such an all-in-one machine?
A
Our JDH - 0.4/300 uvb lclak model is a multi-functional machine. Its basic configuration is comma scraper Spreader, but you can choose UV curing module and tunnel oven module according to your needs. The UV module uses a 365nm lamp source, and the curing area is 500mm * 300mm; the oven module Temperature range is room temperature to 200 ° C, and PID temperature control is used. This machine can complete the continuous process of Spreader, curing/drying, which is especially space-saving. It is suitable for multi-functional material Spreader and post-processing in laboratories or small production lines with limited space.