Huida HD-2032 Martindale Wear Tester Textile products, film material wear resistance testing
SEHuida HD-2032 Martindale Wear Tester, also known as friction resistance Tester, has two test modes and has 4 stations. HD-2032 Wear Tester is used for Textile products, film material wear resistance and Appearance change (pilling) test.
$1656.00/set
PromotionLoading...
Coupon
Model：
HD-2032
Similar products
-
MODERNER JM-V abrasion instrument (film configuration) is suitable for wear performance testing of Coating, paper, plastic, Spinning & weaving products -
CHINA NBC-101-6Z Martindale friction testing machine, six stations$ 2176.00SE -
HUITAO HT-2285-8 Martindale Wear resistance Tester Eight-station Martindale Pilling Tester$ 2628.00SE -
Shanghai PUSHEN JM-VI film abrasion instrument$ 2061.00SE -
Shanghai Pushen JM-IV film abrasion instrument, single platform$ 1501.00SE
Huida HD-2032 Wear testing machineSPEC
Huida HD-2032 Wear testing machineDetails
Huida HD-2032 Wear testing machinePacking list
- SKU
- NB007590
- Friction method
- Swirl/spin
- Frictional contact form
- face
- Number of grinding heads
- 4
- Power
- Ac220V 50Hz 500W
- Dimensions
- 580×560×320mm
- Weight
- 67kg
- Relative movement speed of gripper and grinding table
- 50-2r/min
- Pressurized Mass
- Gripper: 200 ± 1g
- Maximum range
- Horizontal: 60.5 ± 0.5mm; Longitudinal: 24 ± 0.5mm
- Counting range
- 0~999999 times
HD-2032
Wear testing machine
Introduction
Huida HD-2032 Martindale Abrasion Tester is used for performance testing of textiles and membrane materials in terms of wear resistance, abrasion, and appearance change (pilling).
Instrument characteristics
1. Two test modes, plus and minus two counting methods:
Mode 1: 60×60mm Lissajous graphic movement track
Mode 2: 40×40mm Lissajous graphic movement track
2. The flip-free guide plate design, no need to move the sample
plan
FAQ
QHow many stations does this HD-2032 Wear testing machine have?
A
Hello, it is a 4th station.
QCan this HUIDA Martindale Wear testing machine correspond to QB/T2726?
A
Yes, please refer to the NBchao standards page for specific standards.
Knowledge
- 1Effect of titanium dioxide sol content on wear-resistant coating performance
冯海兵;欧迎春;谭欢 - 《涂料工业》
- 2Process methods and characteristics of surface heat treatment and chemical heat treatment
- 3Test method for pilling resistance of fabrics
- 4Selection and importance of wear-resistant testing machine
- 5Working principle and test result evaluation of Martindale wear-resistant testing machine
- 6Introduction to coating wear resistance
- 7Briefly introduce the working principle, application and selection precautions of rubber Wear testing machine
- 8What are the common test methods for coating wear resistance testing?
- 9Development of PPESK High Temperature Self-Lubricating Wear-resistant Coatings
汤传贵;靳钊;蹇锡高 - 《涂料工业》
- 10Coating wear resistance and inspection
Standard
- 1ISO 12947-3《Textiles - Determination of the Abrasion resistance of Fabrics by the martindale method - Part 3: Determination of mass loss》
- 2ISO 12947-4《Textiles - Determination of the Abrasion Resistance of Fabrics by the Martindale Method - Part 4: Assessment of Appearance Change》
- 3ISO 5470-2《Rubber or Plastics Coated Fabrics - Determination of Abrasion Resistance - Part 2: Martindale Abrader》
- 4ISO 12947-2《Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown》
- 5ISO 17076-2《Leather - Determination of abrasion resistance - Part 2: Martindale ball plate method》
- 6ISO 《Textile floor coverings - Test methods for the determination of fibre bind using a modified martindale machine》
- 7ISO 12947-1《Textiles - Determination of the Abrasion resistance of Fabrics by the martindale method - Part 1: Martindale Abrasion testing apparatus》
- 8ASTM D4966《Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)》
- 9ASTM D813-2007《Standard Test Method for Rubber Deterioration-Crack Growth》
- 10JC/T 2570-2020《Color sand flooring materials》