Ipre PRSR200 Roughness Gauge brochure

Related products

PRLH320 Leeb Hardness Tester
170-960HLDHRC、HRB、HV、HB、HS360º (vertical down, slope down, horizontal, slope up, vertical up)

¥1999.0
SE
IPRE SC3020 one-button image Measurement Instrument, measuring range 300mm
X sentire:300mm;Y sentire:200mm;Z sentire:20mmHaikang 20 million pixels0.88X

¥106300.0
SE
PRUT600 Ultrasonic Thickness Gauge penetrating coating thickness measurement
0.15~ 10mm (steel) (E-E mode), 0.75~ 25.4mm (I-E mode)5/10/15/20MHzSplit probe

SE
ZKP Ipre SR131 Deep Slot Sensors
Pinhole SensorsRoughness of the inner surface of the hole with an aperture greater than 2mm can be measured, the maximum depth is 9mm, and the plane cylinder can also be measured.

¥2500.0
SE
IPRE D Impact device for measurement
11mJ5.5g1600HV

¥350.0
SE
IPRE YG140D Roundness meter resolution 0.01μm
Bearing type: air flotation; Spindle Accuracy: soil 0.025μm; System Accuracy: 0.06μm; Maximum measurement outer diameter: φ 140mm (expandable); Minimum inner diameter: φ 3mm; Maximum load bearing: 60kg; Rotation speed: 5 rpmVertical movement: 300mm (can be increased); vertical movement mode: electric; maximum detection depth: 60mm;Horizontal movement: 150mm; Protrusion: 25mm; Horizontal movement mode: electric

¥75050.0
SE
Impact measurement of slender narrow groove bottom
11mJ7.2g1600HV

¥1999.0
SE
IPRE FL8000W Trinocular Upright Metallurgical Microscopy
Large field of view WF10X (0019 22mm)Infinite distance flat-field color difference objective (without coverslip) PL 5X/0.12, L10X/0.25, L40X/0.60, L60X/0.70Triple eyepiece, tilted 30 °, (built-in polarizer, switchable)

SE
IPRE4XC Metallurgical Microscopy Objective Lens 5X/10X/20X/60X
Double cylinder tilt is 30 °55mm~75mmLarge field of view eyepiece 10X (field of view Φ16mm); 10X flat field reticle eyepiece (grid value 0.1mm)

SE
IPRE IPRE YS2 Industrial Endoscope
look straightfixed70°/100°

¥35680.0
SE

Recommended for more brochure