Ipre PRSR210 Roughness Gauge brochure

Related products

IPRE UF200 ultrasonic flaw detection (UFD) instrument, non-Destructiveness detection 120dB gain
120dB0.3-6000.0mm>56dB

¥11300.0
SE
IPRE SR400 Roughometer OLED Digital Display
Ra、Rz、Ry、Rq、Rt、Rp、Rv、Rmax、R3z、RSk、RS、RSm、Rmr、Pku、RpcRa:0.025-12.5μmRa、Rq:0.005-16μm;Rz、Ry、Rt、Rp、Rv、Rmax、 R3z:0.02-160μm;RS、RSm:1mm;Rmr:0-100%(%Rt);Rsk:0-100%

¥4180.0
SE
IPRE BH200M-W Computer-based Metallurgical Microscopy (excluding computer)
Optical inspection system for color difference correction30 ° tilt, hinged trinocular observation cylinder, 360 ° swirl/spin, pupil distance adjustment range: 50-75mm, bilateral vision adjustment: +/- 5 diopters, fixed spectral ratio, binocular: trinocular = 80:20.High eye point and large field of view flat field eyepiece PL10X/18mm

¥10800.0
SE
IPRE XY3020Q image Measurement Instrument, stroke 300mm
X sentire:300mm;Y sentire:200mm;Z sentire:200mm(3+L/200)μm1μm

¥56300.0
SE
PRLH210 Leeb Hardness Tester Hardness range 170~960HLD
170~960HLDHL/HRC/HRB/HV/HB/HS±6HLD (HLD=760±30)

SE
PRSR110 Roughness Gauge 4 measurement parameters Ra/Rz/Rt/Rq
Digital display (OLED liquid crystal display)Ra、Rz、Rt、RqRa、 Rq：0.05~10.0;Rz、 Rt：0.1~50

SE
IPRE Ipre SR130 Groove Sensors
Groove SensorsIt can measure the surface roughness of grooves with a groove width greater than 2mm and a groove depth of less than 3mm, or the surface roughness of steps with a height of less than 3mm, and can also measure flat and cylindrical surfaces.

¥2600.0
SE
PRSR210 Digital Roughness Gauge supports 13 measurement parameters
Digital display (128 × 64 OLED dot matrix liquid crystal (self-luminous))Ra、Rz、Ry、Rq、Rt、Rp、Rv、Rmax、R3z、RSk、RS、RSm、RmrOutput: 0.025 ~ 12.5μm

SE
IPRE G Impact device for measurement of large and heavy specimens and castings and forgings with rough surfaces
90mJ20g1600HV

¥1799.0
SE
IPRE PRINCE775 3D scanner, ultra-fine scanning
R standard scanning mode; B ultra-fine scanning mode315 * 160 * 105 (Haomi)0.95 kg

¥261300.0
SE

Recommended for more brochure