QB/T 1896-1993 《Bicycle powder painting technical conditions》 Related products
The standard specifies the technical requirements for Bicycle powder painting, including coating adhesion, abrasion resistance, Appearance and anti-corrosion performance. Its purpose is to standardize the powder coating process and improve coating mass and durability. Proposed by the mass standards department of the Ministry of Light Industry, the national Bicycle Standardization Center is under the control, and the drafting group of the industry standard "Bicycle powder painting technical conditions" is responsible for drafting, which ensures the scientificity and applicability of the technical requirements.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | ICS |
| Release Date | Implementation Date |
-
$ 131.00 -
$ 1198.00 -
-
$ 1694.00 -
$ 254.00 -
$ 156.00 -
$ 138.00 -
-
$ 276.00 -
$ 198.00 -
$ 148.00 -
$ 574.00 -
$ 2071.00 -
$ 141.00 -
$ 265.00 -
$ 234.00 -
$ 599.00
Extended reading
- 1QB/T 1218-1991《Bicycle paints technical conditions》
- 2ZB 17022-1989《Sewing machine paint drying technical conditions》
- 3JB/T 7571-1994《Guide for Dipping Coil of Welding Machine》
- 4JB/T 5260-1991《Guidelines for painting process of silicon steel sheet》
- 5GB/T 1981.3-2009《Paints for electrical insulation - Part 3: General specification for heat-curing impregnating materials》
- 6GB/T 17459-1998《Ductile cast iron pipe asphalt coating》
- 7GB/T 17458-1998《Ductile cast iron tube cementitious mortar centrifugal lining, composition inspection of fresh mortar》
- 8GB/T 17457-2009《Ductile cast iron pipes and fittings cementitious mortar lining》
- 9GB/T 17456.1-2009《Zinc coatings on the outer surface of ductile cast iron tubes - Part 1: Metallic zinc coatings with finishes》
- 10SY 4042-1989《Steel pipe powder coating technical standard》