GB/T 601-2016 《Chemical reagent—Preparations of reference titration solutions》 Related products
This standard specifies the preparation and calibration methods of standard titration solutions for chemical reagents. It is suitable for the preparation and calibration of standard solutions for the determination of the purity and impurity content of chemical reagents by the Titrimetric method, and is also applicable to the field of Miscellaneous. The standard specifies the reagent requirements, concentration calculation and temperature correction methods required to prepare the solution to ensure the accuracy of the titration solution.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | G60 | ICS | 71.040.40;71.040.30 |
| Release Date | 2016-10-13 00:00:00 | Implementation Date | 2017-05-01 00:00:00 |
Extended reading
- 1GB/T 5174-2018《Surface active agents—Detergents—Determination of cationic-active matter content—Direct two-phase titration procedure》
- 2GB/T 5124.3-2017《Hardmetals—Part 3：Determination of cobalt—Potentiometric method》
- 3GB/T 13747.1-2017《Methods for chemical analysis of zirconium and zirconium alloys—Part 1：Determination of tin content—Potassium iodate titration and phenylfluorone-polyethylene glycoloctyl phenyl ether spectrophotometry》
- 4GB/T 1819.10-2017《Methods for chemical analysis of tin concentrates—Part 10: Determination of sulfur content—High frequency combustion with infrared absorption method and potassium iodate titrimetric method》
- 5GB/T 1819.12-2017《Methods for chemical analysis of tin concentrates—Part 12:Determination of silicon dioxide content—The silicomolybdenum blue spectrophotometry and sodium hydroxide titration》
- 6GB/T 34499.1-2017《Method for chemical analysis of iridium compounds—Part 1: Determination of iridium content—Electricity titration using ferrous sulfate》
- 7GB/T 4698.12-2017《Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 12：Determination of vanadium content—Ammonium ferrous sulfate titration and inductively coupled plasma atomic emission spectrometry》
- 8GB/T 8454-2020《Reduced ilmenite powder for welding rob—Determination of ferrous iron content—Potassium dichromate titrimetric method》
- 9GB/T 8704.5-2020《Ferrovanadium—Determination of vanadium content—The ammonium ferrous sulfate titrimetric method and the potentiometric titrimetric method》
- 10GB/T 38812.1-2020《Direct reduced iron—Determination of iron(Ⅱ) content—The potassium dichromate titrimetric method after decomposition of sample by ferric chloride》