GB/T 5059.1-2014 《Ferromolybdenum―Determination of molybdenum content―Lead molybdate gravimetric method,ammonium metavanadate titration method and 8-hydroxyquinoline gravimetric method》 Related products
This standard specifies three methods for the determination of molybdenum content in ferromolybdenum: lead molybdate weighting method, ammonium metavanadate Titrimetric method, and 8-hydroxyquinoline weighting method. Applicable to samples with molybdenum content ranging from 50.00% to 75.00%. In the lead molybdate weighting method, the sample is dissolved with nitric acid, ammonium fluoride, and muriatic acid, and the interfering elements are removed with sodiumhydrate, which is then reacted with lead acetate to produce lead molybdate settling, which is weighed after filtration washing and burning to calculate the molybdenum content. The reagents used in all methods must be analytically pure to ensure the accuracy of the determination results.
| Status | Active |
|---|---|
| CCS | H11 | ICS | 77.100 |
| Release Date | 2014-03-27 00:00:00 | Implementation Date | 2015-01-01 00:00:00 |
- 1GB/T 7698-2014《Sodium hydroxide for industrial use―Determination of carbonates content―Titrimetric method》
- 2GB/T 5687.4-2016《Nitrogen-bearing ferrochromium and nitride ferrochrome with high nitrogen content—Determination of nitrogen content—The distillation-neutralization titration method》
- 3GB/T 6730.73-2016《Iron ores—Determination of total iron content—EDTA photometric titration method》
- 4GB/T 11133-2015《Standard test method for determination of water in petroleum products, lubricating oils and additives—Coulometric Karl Fischer titration method》
- 5GB/T 1792-2015《Determination of mercaptan sulfur in gasoline,kerosine,jet,and distillate fuels—Potentiometric method》
- 6GB/T 3884.15-2014《Methods for chemical analysis of copper concentrates―Part 15：Determination of iron content―Potassium dichromate titration method》
- 7GB/T 3884.16-2014《Methods for chemical analysis of copper concentrates―Part 16： Determination of silicon dioxide content―K2SiF6 titrimetric method and Gravimetric method》
- 8GB/T 3884.17-2014《Methods for chemical analysis of copper concentrates―Part 17：Determination of aluminium oxide content―Chromazurol S spectrophotometric method and fluoride salts device-Na2EDTA titrimetric method》
- 9GB/T 4372.1-2014《Methods for chemical analysis of zincoxide produced by direct process―Part 1：Determination of zinc oxide content―Na2EDTA titration method》
- 10GB/T 3286.7-2014《Methods for chemical analysis of limestone and dolomite―Part 7: The determination of sulphur content―The pipe furnace combustion iodic acid potassium titration method，the high frequency combustion with infrared absorption method and the barium sulfate gravimetric method》