GB/T 328.9-2007 《Test methods for building sheets for waterproofing - Part 9: Plastic and rubber sheets for waterproofing-tensile properties》 Related products

Using high-precision, non-clearance ball screw and timing belt as the guarantee of transmission system accuracy, fully computerized data collection and motion control, force measurement accuracy of 0.5 level, 1/300000 force value resolution.

The ring initial tack Tester is compact and delicate in structure, using imported Sensors and motors, and is mainly used for the initial adhesion of various products such as tapes and gluing agents.

Capacity 5T, force measurement accuracy +/- 0.5%, force measurement resolution 1/300000, effective force measurement range 1~ 100% F.S., can be used to test tensile, compression, bending, shearing, disbonding, tearing and other mechanical properties.

Adopt ball screw drive and high-end stepper motor, equipped with large screen touch display, real-time display of test data, and support printing tensile strength, elongation and other results. Built-in micro-printer, with automatic reset, data memory and overload protection functions.

Capacity 0~300kg, accuracy level 0.5, force range 0.02/100 -100%, using imported electrical components, with peak holding, sample breaking stop function, support stepless speed regulation.

Suitable for tensile, disbonding, tearing and heat sealing strength testing of Plastic film, composite film and other materials. LCD real-time display, touch key operation, support Linear dispersion analysis and various test modes. With closed-loop control, peak hold, overload protection functions, speed range 1-500mm/min

The force range is 10~500N, and the test stroke is 350mm, which can measure tensile compression, bending disbonding, displacement, tearing, insertion force, tensile damage force and other tests.

Measurement accuracy +/- 1%, resolution 1/200000, can be used for tensile strength, peeling strength, deformation rate, breaking force, disbonding force, opening force and other performance tests.

Stroke 1000mm, touch key Operation mode, using CHINA Sensors, Tester level 1, test force accuracy is better than +/- 1%, test force 1000N.

The pointer push-pull force meter is used to display the force value with the pointer scale and then observe and read it. The force value measurement range is 10~500N, and the effective stroke is 350mm.

Capacity selection 1T, force resolution 1/300000, Control system uses full digital control Frequency AC motor, speed accuracy can be controlled within +/- 0.5%, Test speed range 1~ 500mm/min.

Touch LCD, adopt high-precision system, with digital display of test force, which can realize the adjustment of the speed of the beam when the sample is clamped. The test force Precision is better than +/- 1%, and the test stroke is 600mm.

Equipped with a computer, it integrates measurement, control, calculation and storage functions. It has the function of automatically calculating stress, elongation, tensile strength and elasticity modulus, and the load is not greater than 20T.

The test force range is 0~2000N, the stroke is 800mm, the touch LCD, the measurement range is 2%~ 100% of the maximum test force, the accuracy is better than the indication +/- 1%, and the tensile strength test can be realized.

Stroke 600mm, touch key Operation mode, using CHINA Sensors, Tester level 1, test force Precision is better than +/- 1%, test force 1000N.

Touch LCD, using high-precision system, with digital display of test force, can realize the adjustment of the speed of the beam when the sample is clamped, the test force accuracy is better than +/- 1%, and the test stroke is 1000mm.

Support tensile, heat sealing, disbonding, tearing and other items. With touch operation, real-time LCD display, stepless speed regulation function, high control accuracy, provide test data Linear dispersion.

Suitable for tensile, disbonding, tearing and heat sealing strength testing of Plastic film, composite film and other materials. Touch key operation, LCD real-time display, support force value and displacement Linear dispersion analysis. With high-precision closed-loop control, overload protection, peak hold and other functions, speed range 1-500mm/min

Suitable for tensile, disbonding, tearing and heat sealing strength testing of Plastic film, composite film and other materials. Touch key operation, LCD real-time display, with closed-loop control, peak hold, overload protection and other functions. Support 1-500mm/min speed regulation

Test force range 0~500N, stroke 800mm, touch LCD, Measurement range 2%~ 100% of the maximum test force, Precision is better than indication +/- 1%, can realize tensile strength test.

Plastic film, composite film and other materials tensile, disbonding, heat sealing, tearing and other performance test design, with touch key operation and real-time LCD display. It supports stepless speed regulation (1-500mm/min)

High matching, can measure tensile rate, disbonding force, tensile strength, opening force, etc., with Measurement certificate, +/- 1% accuracy, 1/200000 resolution.

Test force 100 N, displacement rate adjustment range 1~ 500mm/min, suitable for a variety of Plastic film and composite film performance testing, including tensile strength, fracture elongation, resilience modulus.

Suitable for tensile, disbonding, tearing and heat sealing strength testing of Plastic films, composite films and other materials. Touch key operation, LCD real-time display, support for multiple test modes and Linear dispersion analysis. With closed-loop control, peak hold, overload protection functions, speed range 1-500mm/min

Stroke 600mm, touch key Operation mode, with test force digital display, test machine level 1, test force Precision is better than +/- 1%, test force 1000N.

Suitable for tensile, disbonding, tearing and heat sealing strength testing of Plastic film, composite film and other materials. Touch key operation, LCD real-time display, support force value and displacement Linear dispersion analysis. With closed-loop control, high-precision measurement, overload protection, peak hold function, speed range 1-500mm/min

Test force 100 N, displacement rate adjustment range 1~ 500mm/min, suitable for Plastic film and composite film performance testing, including tensile strength, fracture elongation, resilience modulus, etc.

The test force is 300N, the displacement rate adjustment range is 1~ 500mm/min, which is suitable for the measurement of tensile strength, fracture elongation, resilience modulus of various Plastic films and composite films, and can also be used for disbonding, tearing, heat sealing strength and other performance tests.