ISO 787-16 《General Methods of Test for Pigments and Extenders - Part 16: Determination of Relative Tinting Strength (or Equivalent Colouring Value) and Colour on Reduction of Coloured Pigments - Visual Comparison Method》 Related products
The ISO 787-16 standard specifies a method for determining the relative Color-Strength (or equivalent chromadizing value) of pigments and whitening agents, as well as the reduced Color of colored pigments, using the visual comparison method. This method is suitable for similar colored pigments, and their Color-Strength and reduced Color are evaluated by comparison with the agreed sample. During the test, the sample is mixed with the white pigment to form a diluted slurry, and visually compared with the standard sample to determine the relative Color-Strength and Color change. The standard is widely used in the quality control and Product Research & Development of pigments and whitening agents.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | ICS | 87.060.10 |
| Release Date | 1986-01-01 00:00:00 | Implementation Date |
Extended reading
- 1TAPPI T 569《Internal bond strength (Scott type)》
- 2ISO 15361《Pulps - Determination of Zero-Span Tensile Strength, Wet or Dry》
- 3ISO 5263-3《Pulps Laboratory wet disintegration Part 3: Disintegration of mechanical pulps at greater than or equal to 85 °C》
- 4ISO 5269-2《Pulps Preparation of laboratory sheets for physical testing Part 2: Rapid-Köthen method》
- 5ISO 23713《Pulps - Determination of fibre coarseness by automated optical analysis - Polarized light method》
- 6ISO 5263-1《Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps》
- 7ISO 17812《Paper, board and pulps — Determination of total magnesium, total calcium, total manganese, total iron and total copper》
- 8ISO 638《Paper, board and pulps - Determination of dry matter content - Oven-drying method》
- 9ISO 10775《Paper, board and pulps - Determination of cadmium content - Atomic absorption spectrometric method》
- 10ISO 699《Pulps - Determination of Alkali Resistance》