Drying time Recorder

All-electric operation type, in line with ISO 9117-4 and ASTM D5895 standards, the whole moving time is 6min~ 60h (a total of 10 gears to choose from), and the drying and curing time of wet-film coatings such as coatings, inks, and Adhesives are specially measured.

Used to measure inks drying time, pressurized wheel mass 100g, pressurized wheel traverse speed 2mm/r, test timing (16 gears) 5~ 20h, round drum full ring number 120r, per turn time accuracy +/- 0.025s

The number of strokes is 6 needles, the stroke is 305mm, the track period is 6/12/24 h, the sample size is 316 * 24 * 3mm, the track period is 6/12/24 h, the track is straight, the execution standard GB/T1728-89, the measurement error is +/- 4%.

6 samples can be measured at the same time, saving measurement time. It has three adjustable speeds of 6, 12 and 24 hours to automatically record the process of coating drying and curing

Used to measure the drying time of film and putty film, with four different radii of the needle (R 0.25/0 5/1.0/1.5mm), the needle track is round, the period is 24 hours. The sample size is 200 × 200 × (0.2~ 3) mm, accurate measurement of film drying state

The number of strokes is 4, the size of the strokes is R 0.25/0 5/1.0/1.5mm, the stroke is φ 100mm, the track period is 6/12/24 h/T, the execution standard GB/T1728-79, and the measurement error is +/- 0.5%.

Instrument specially designed for the determination of non-stick tire drying time of road marking paints in GA/T298-2001 standard. Tire size φ 241 +/- 6mm, instrument weight 15.8 +/- 0.2kg.

PUSHEN GZY-I Linear Drying Time Recorder is used to test the drying and curing time of coatings and paints. According to the drying condition of the surface coating, the specimen is moved vertically to meet ISO and ASTM standards to ensure the mass of coatings and paints.

The drying and curing time of Coating and paints were measured by observing the change of scratch track. The number of strokes was 6, the size of the strokes was φ 1mm, the load weight was 11g, the stroke was 300mm, and the track period was 1h/6h, 2h/12h, 3h/24h.

Equipped with six independent tracks and a heated display, the operation temperature range is -20 ° C to 70 ° C, the time setting accuracy error is less than 1%, and it supports a wide range of drying time testing requirements from 1 minute to 200 hours.