Incubator

Temperature up to 50 ℃, liner 500x500x650mm, volume 160L; with 2 shelves; large screen LCD display, door temperature heating system, secondary pressure reducing valve; optional microbial high efficiency Filter.

Volume of 1000L, using a large LCD screen, Temperature range of 0~ 65 ℃, international brand compressor, JAKEL tube flow circulating fan, PID Control mode.

Stackable placement (two layers), microcomputer controller, stainless steel liner with Shelf, four corners and half arc transition, infrared Sensors, close the door after 30 seconds of real door opening, it can be restored to the set temperature of 37 ° C in less than 10 minutes, and to 5% set CO2 concentration in less than 5 minutes.

Light level six adjustable, Illumrination degree 0~ 25000Lx, volume 800L, standard 3 brackets, large screen LCD display, multiple sets of data on one screen display.

Large LCD screen, stainless steel mirror liner, light intensity of 0~ 15000Lx, nominal volume 250L.

Temperature range 0~ 65 ℃, Temperature Uniformity +/- 1.2 ℃, standard shelf 3 pieces, mirror stainless steel liner, large screen LCD display.

Water analysis and BOD measurement, volume is 500L, Temperature range 0~ 65 ℃, liner size 700 * 700 * 1020mm, mirror stainless steel liner.

Imported compressor and JAKEL tube flow circulating fan, mirror stainless steel liner, liner size 680 * 550 * 1050mm, Temperature Fluctuation +/- 1.0 ℃.

For microbial tissue cell fostering, light intensity 0~ 12000Lx, working volume 150L, mirror stainless steel liner, without fluorine refrigerant.

Mirror stainless steel liner, fluorine-free environmental protection, for bacteria, microorganisms and other foster storage, Temperature range 0~ 65 ℃, volume 150L, standard 3 shelves.

Volume of 250L, Temperature range 0~ 65 ℃, fluorine-free environmental protection type, mirror stainless steel liner, four corners and half arc design, for water analysis and BOD determination.

Large screen LCD display, using imported compressor, Power is 400W, fluorine-free environmental protection type, volume is 70L.

Volume 250L, Temperature range 0~ 65 ℃, Temperature Uniformity +/- 1.2 ℃, using international brand compressor, PID Control mode, temperature control accurate fluctuation small, mirror stainless steel liner.

Volume 1000L, Temperature range 0~ 65 ℃, Temperature Fluctuation +/- 0.3 ℃, Mirror stainless steel liner, 134a without fluorine refrigerant, PID precise temperature control.

Volume of 150L, the use of international brand compressor, Temperature range of 0~ 65 ℃, PID Control mode, accurate temperature fluctuations, with timing function.

Adopt mirror stainless steel liner and PID Temperature control mode, Temperature Uniformity +/- 1 ℃, Fluctuation High Temperature +/- 0.3 ℃, equipped with adjustable shelf and test hole, support multi-stage programming and independent temperature limit alarm to ensure the safety and stability of the experiment.

The mirror stainless steel liner is easy to clean, Temperature Uniformity +/- 1 ℃, volume 70L. Double door structure is easy to observe, PID temperature control is accurate, with timing function, support multi-stage programming control.

Using large LCD screen, Temperature range of 0~ 65 ℃, volume 70L, using international brand compressor, PID Control mode, temperature control accurate fluctuation small, with timing function.

Light source vertical design supports 10-level dimming, temperature control accuracy of +/- 1 ℃. 99 cycle program control function, support continuous operation, built-in mirror stainless steel liner for easy cleaning and maintenance.

Mirror stainless steel liner is easy to clean, Temperature Uniformity +/- 1 ℃, equipped with ultraviolet sterilization system to prevent pollution, adjustable fan wind speed to avoid sample water loss, support multi-stage programming control to simplify the experimental process.

Adopt mirror stainless steel liner and PID temperature control technology, Temperature Uniformity +/- 1 ℃, equipped with adjustable shelf and test hole, support multi-stage programming and independent temperature limit alarm to ensure the safety and accuracy of the experiment.

Temperature range 0~ 65 ℃, Temperature Uniformity +/- 1 ℃, volume 500L, shelf (standard) 2pcs, liner material mirror stainless steel.

Mirror stainless steel liner is easy to clean, Temperature uniformity +/- 1 ℃, UV sterilization system prevents pollution, supports multi-stage programmable control, Timer Range 1~ 9999 minutes, to meet the needs of complex experiments.

With 0-25000Lx Illumrination degree and ten-level dimming function, support 99 cycle program control. Mirror stainless steel liner and two-speed fan system are used to effectively maintain Temperature uniformity and prevent sample moisture loss to meet complex experimental needs.

Equipped with UV sterilization system to prevent foster pollution, Temperature range 0~ 65 ℃ and Fluctuation +/- 0.3 ℃, support multi-stage programming and independent temperature limit alarm to ensure experimental safety and uniformity.