Coating Thickness Gauge

0~100μm thickness range; suitable for underwater thickness measurement, waterproof and explosion-proof; no need to calibrate, no power supply; EPK hot-selling mechanical Coating Thickness Gauge.

10Mm range, no need to use any power supply and battery, magnetic attraction principle, can measure the thickness of enamel, plastic and rubber layer on steel, mechanical Impact resistance, acid resistance and solvent corrosion, no need to calibrate.

Magnetic Induction thickness measurement principle, no need to calibrate, no power supply, measurement range 0~100μm, measurement accuracy of +/- (1μm + 5% of reading value), suitable for Eletroplating nickel on non-ferromagnetic metal substrates.

Display accuracy 0.1μm, battery life to meet more than 40,000 measurements, statistical functions: average, MAX Maximum, MIN Minimum, standard deviation, measurement range 5mm.

Display accuracy 0.1μm, display 2 inch wide Viewing Angle omnidirectional IPS-TFT color LCD, power supply 2xAA alkaline battery, battery life meets 40,000 previous measurements, statistical function average, MAX Maximum, MIN Minimum, standard deviation, measurement speed ≥ 100/min, measurement accuracy (Fe mode ) +/- ( 1μm + 2% reading) @0-2mm or +/- 5% reading @> 2mm, measurement accuracy (NFe mode ) +/- ( 2μm + 2% reading) @0-2mm or +/- 5% reading Number @> 2mm.

Display accuracy 0.1μm, power supply 2xAA alkaline battery, battery life to meet the 40,000 above the measurement, measurement range 3mm, principle based on the Hall principle of magnetic substrate measurement and magnetic eddy current measurement of nonmagnetic substrate, measurement speed ≥ 100/min.

Display accuracy 0.1μm, display 2 inches wide Viewing Angle omnidirectional IPS-TFT color LCD, power supply 2xAA alkaline battery, battery life meets 40,000 above the measurement, statistical function average, MAX Maximum, MIN Minimum, standard deviation, operating temperature 0 ℃~ + 50 ℃, storage temperature -20 ℃~ + 70 ℃, Relative Humidity 10%~ 90%, measurement range 3mm, measurement speed ≥ 100/min, measurement accuracy (Fe mode ) +/- ( 1μm + 2% reading) @0-2mm or +/- 5% reading @> 2mm.