Cross-Cut Tester

1 + 2 + 3mm tooth spacing; 6 teeth; multi-blade swirl/spin head; in line with ISO2409 standard.

Cross-cut length 35mm, cross-cut number 7, 11, cross-cut spacing 1, 1.5, 2, 3mm, 304 stainless steel, with 600 type tape and nylon brush.

QFH comes standard with 1mm/2mm/3mm cutter heads, which comply with ISO2409-1974 standards and are suitable for organic coating coating testing.

SISI adhesion hundred grid board, also known as guide grid gauge, cut mark spacing 1mm, 1.5mm, 2mm, 3mm, cut mark length 35mm, cut mark number 11, in line with the standard BS3962-6, GB4893.4-85.

1Mm cutter tooth spacing; 6 teeth; three-edged swirling/spinning cutter head; suitable for 0-60um film thickness environment.

1Mm cutter tooth spacing; 11 teeth; three-edged swirling/spinning cutter head; suitable for 0-60um film thickness environment.

Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with a knife spacing of 2mm, a number of teeth 6, and a single working face.

Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, knife pitch 1mm, number of teeth 6, single working face.

The number of teeth is 6, the distance between the teeth is 2mm, the material of the instrument is plastic, the application standard ISO 2409, and the number of blades is 3.

Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with a knife spacing of 3mm, a number of teeth 6, and a single working face.

Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with 1mm knife spacing, 11 teeth, and a single working face.

Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with a knife spacing of 1.5mm, 11 teeth, and a single working face.

11 teeth, knife tooth spacing 2mm, instrument material wood, application standard ISO 2409, suitable for film thickness environment 60~100μm, the number of blades 3.

Single cutter head, 6 teeth/3mm spacing, using wooden handle, in line with ISO2409 standard, suitable for Film thickness 60~150μm.

Single cutter head, 6 teeth/3mm spacing, in line with ISO2409 standard, suitable for Film thickness 60~150μm.

Using 304 stainless steel, cross-cut length 35mm, cross-cut number 11, cross-cut spacing 1mm, with 600 type tape and nylon brush.

Using 304 stainless steel, cross-cut length 35mm, cross-cut number 11, cross-cut spacing 2mm, with 600 type tape and nylon brush.

Using 304 stainless steel, cross-cut length 35mm, cross-cut number 11, cross-cut spacing 1.5mm, with 600 type tape and nylon brush.

Using 304 stainless steel, cross-cut length 35mm, cross-cut number 6, cross-cut spacing 3mm, with 600 type tape and nylon brush.