Cross-Cut Tester

Brand

All >

Cut Spacing

All >

All
1mm
1.5mm
2mm
3mm

Number of Cutting Edges

All >

All
6
11

Test substrate

All >

All
Hard substrate
Soft substrate

Measured film thickness

All >

All
0 ~ 60µm
61 ~ 120m
121 ~ 250µm

Cutter Type

Multi-blade >

All
Single blade
Multi-blade

Applicable standard

All >

All
GB/T 9286
ASTM D3359
ISO 2409
Miscellaneous

Miscellaneous

All >

All
guide plate
Scribe
tape
handle
knife head

Country

All >

Featured Filter Service

Featured Hot Price

$ 187.00

QFH Cross Hatch Cutter 1/2/3 mm Tooth QFH Cross Hatch Cutter 6 Tooth SE
6 teeth1mm、2mm、3mm

1 + 2 + 3mm tooth spacing; 6 teeth; multi-blade swirl/spin head; in line with ISO2409 standard.

Compare
SPEC OI VIDEO
$ 178.00

QFH Cross Hatch Cutter 1/2/3 mm Tooth QFH Cross Hatch Cutter 11 Tooth SE
11 teeth1mm、2mm、3mm

QFH comes standard with 1mm/2mm/3mm cutter heads, which comply with ISO2409-1974 standards and are suitable for organic coating coating testing.

Compare
SPEC
MODERNER QFH 1mm (5 slots) Cross Hatch Cutter Number 6 SE
6 teeth1mm0 ~ 60µm

1Mm cutter tooth spacing; 6 teeth; three-edged swirling/spinning cutter head; suitable for 0-60um film thickness environment.

Compare
SPEC OI VIDEO
$ 972.00

Germany erichsen 295/I Lacquered Cross Hatch Cutter Set 6 teeth/1mm SE
6 teeth1mm0~60μm

Compare
SPEC CAT
$ 972.00

Erichsen 295/II Cross Hatch Cutter Set 6 teeth/2mm SE
6 teeth2mm61~120μm

Compare
SPEC CAT
MODERNER QFH 1mm (10 slots) Cross Hatch Cutter 11 blade 1mm pitch SE
11 teeth1mm< 60μm

1Mm cutter tooth spacing; 11 teeth; three-edged swirling/spinning cutter head; suitable for 0-60um film thickness environment.

Compare
SPEC OI VIDEO
MODERNER QFH 2mm (5-slot) Cross Hatch Cutter for organic coatings cross-cut adhesion determination SE
6 teeth2mm

The number of teeth is 6, the distance between the teeth is 2mm, the material of the instrument is plastic, the application standard ISO 2409, and the number of blades is 3.

Compare
SPEC OI VIDEO
MODERNER QFH 3mm (5 slots) Cross Hatch Cutter film coating adhesion test SE
6 teeth3mm60~120μm

Compare
SPEC OI VIDEO
MODERNER QFH 2mm (10 slots) Cross Hatch Cutter 11 Blades 2mm Pitch SE
11 teeth2mm60 ~ 100µm

11 teeth, knife tooth spacing 2mm, instrument material wood, application standard ISO 2409, suitable for film thickness environment 60~100μm, the number of blades 3.

Compare
SPEC OI VIDEO
MODERNER QFH 3mm × 5 Cross Hatch Cutter 6 teeth 3mm pitch SE
6 teeth3mm60 ～ 150μ m

Single cutter head, 6 teeth/3mm spacing, using wooden handle, in line with ISO2409 standard, suitable for Film thickness 60~150μm.

Compare
SPEC VIDEO
MODERNER 3mm × 5 single edge cross-cut cutter head 3mm pitch 6 teeth SE
6 teeth3mm60 ～ 150μ m

Single cutter head, 6 teeth/3mm spacing, in line with ISO2409 standard, suitable for Film thickness 60~150μm.

Compare
SPEC VIDEO
$ 1078.00

Germany Erichsen 295/V Paint film adhesion Cross Hatch Cutter set 11 teeth/1mm SE
11 teeth1mm0~50μm

Compare
SPEC CAT
$ 912.00

Netherlands TQC VF1847 Cross Hatch Cutter Set CC1000 Series Cross Hatch Cutter SE
11 teeth1.5mm50~125μm

The number of teeth is 11 teeth, the spacing between teeth is 1.5mm, the instrument material is vacuum hardened stainless steel, aluminum, rubber, the application standard ASTM D3359-2009, suitable for film thickness environment 50~ 125μm.

Compare
SPEC CAT OI VIDEO
$ 148.00

Shanghai PUSHEN 1mm Cross Hatch Cutter SE
11 teeth1mm

Compare
SPEC CAT
$ 176.00

QFH-A cross-cut adhesion Tester YONGLIDA standard 3 swirl/spin cutter heads SE
6 teeth1mm、2mm、3mm

The QFH-A cross-cut adhesion Tester is equipped with three swirl/spin cutter heads with a spacing of 1mm, 2mm, and 3mm. The QFH-A cross-cut adhesion Tester is designed according to the standard ISO2409 and is suitable for GB/T9286 standards.

Compare
SPEC CAT
$ 179.00

PUSHEN HGQ 2 * 5 multi-edge cross-cut Tester number of teeth 6 teeth, spacing 2mm SE
6 teeth2mm60~120μm

Compare
SPEC CAT OI VIDEO
$ 776.00

TQC VF2357 cross-cut blade 6 teeth 2mm for CC1000 series SE
6 teeth2mm0~60µm (soft substrate)

Compare
SPEC
$ 778.00

TQC VF2358 cross-cut blade 6 teeth 3mm for CC1000 series SE
6 teeth3mm0 to 60 µm (solid substrate)

Compare
SPEC
$ 773.00

Dutch TQC VF1861 cross-cut cutter head for CC1000 series Cross Hatch Cutter SE
6 teeth1.5mm50~125μm

Cross-cut cutter head 1,5mm ASTM for CC1000

Compare
SPEC
$ 778.00

TQC VF2355 cross-cut blade 6 teeth 1mm for CC1000 series SE
6 teeth1mm0 to 60 µm (solid substrate)

Compare
SPEC
$ 783.00

TQC VF2359 cross-cut blade 11 teeth 1mm for CC1000 series SE
11 teeth1mm0~60µm (soft substrate)

Multi-blade, number of teeth 11, spacing 1mm; sharp wear-resistant stainless steel material; meets ASTM3359 standard; for soft substrates within 60μm.

Compare
SPEC
$ 179.00

Pushen HGQ 1 * 5 Multi-blade Cross Hatch Cutter Suitable for hard substrates less than 60μm SE
6 teeth1mm0 to 60 µm (solid substrate)

1mm cutter tooth spacing, 6 teeth; 1 multi-edge stainless steel swirl/spin cutter head; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ISO2409 standards.

Compare
SPEC CAT OI VIDEO
$ 130.00

QFH film cross-cutting instrument YONGLIDA Adhesion Tester comes standard with two knife heads SE
6 teeth1mm、2mm

The number of teeth is 6, and the spacing between teeth is 1mm and 2mm. The application standards are ISO2409 and GB/T9286.

Compare
SPEC CAT
$ 179.00

PUSHEN HGQ 2 * 10 multi-blade, paint film cross-cut Tester number of teeth 11 teeth, spacing 2mm SE
11 teeth2mm60~120μm

2Mm cutter tooth spacing, 11 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; suitable for 60-120um film thickness; in line with GB/T9286, ISO2409 standards.

Compare
SPEC CAT OI VIDEO
$ 179.00

PUSHEN HGQ 3 * 5 Cross Hatch Cutter Number of teeth 6 teeth, pitch 3mm SE
6 teeth3mmSuitable for hard substrate samples larger than 120 μm

3Mm cutter tooth spacing, 6 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; applicable > 120um film thickness; in line with GB/T9286, ISO2409 standards.

Compare
SPEC CAT OI VIDEO