Torque Tester

Range 10N.m, resolution 0.001N.m, 0.5 Precision, Locking Drill Chuck Design, Segment LCD, Peak Hold Time and Gravity Acceleration Value can be set.

Measurement range 2~ 10N.m, Measurement range 20.4~ 102kgf.cm, Measurement range 17.7~ 88.5lbf.in, load Graduation 0.005N.m, load Graduation 0.05kgf.cm, lbf.in, measurement error +/- 1%.

Range 2N.m, resolution 0.001N.m, 0.5 Precision, Locking Drill Chuck Design, Segment LCD, Peak Hold Time and Gravity Acceleration Value can be set.

Range 100N.m, Graduation 0.001N.m, wrench length 180-900mm, 7-inch color touch LCD screen, can do two-way verification, can customize 8 check points, with USB interface.

Range 5N.m, load Graduation 0.001N.m, Sensors structure Sensors built-in, Precision +/- 0.5%.

Measurement range 10~50N.m, Measurement range 102~ 510.2kgf.cm, Measurement range 88.5~ 442.5lbf.in, load Graduation 0.005N.m, load Graduation 0.05kgf.cm, lbf.in, measurement error +/- 1%.

Range 20N.m, Graduation 0.01N.m, wrench length 180-420mm, using large 7-inch color touch LCD screen, can do two-way verification, can customize 8 check points, with USB interface.

Measurement range 20~100N.m, Measurement range 204~ 1020kgf.cm, Measurement range 177~ 885lbf.in, load Graduation 0.1N.m, load Graduation 1kgf.cm, lbf.in, measurement error +/- 1%.

Range 5N.m, Graduation 0.001N.m, wrench length 180-420mm, using large 7-inch color touch LCD screen, can do two-way verification, can customize 8 check points, with USB interface.

Range 1N.m, resolution 0.0001N.m, 0.5 Precision, locking drill chuck design, segment LCD, peak hold time and gravity acceleration value can be set.

Measurement range 4~ 20N.m, Measurement range 40.8~ 204.1kgf.cm, Measurement range 35.4~ 177.1lbf.in, load Graduation 0.005N.m, load Graduation 0.05kgf.cm, lbf.in, measurement error +/- 1%.

Range 10N.m, Graduation 0.001N.m, wrench length 180-420mm, 7-inch color touch LCD screen, can do two-way verification, can customize 8 check points, with USB interface.

Range 200N.m, resolution 0.1N.m, 7-inch large color touch LCD screen, can customize 10 different test items and 8 test points, hand crank to adjust the length of the loading arm.

Range 50N.m, Graduation 0.01N.m, wrench length 180-900mm, using large 7-inch color touch LCD screen, can do two-way verification, can customize 8 check points, with USB interface.

Measurement range 40~200N.m, Measurement range 408~ 2041kgf.cm, Measurement range 354~ 1770lbf.in, load Graduation 0.2N.m, load Graduation 2kgf.cm, lbf.in, measurement error +/- 1%.

Range 5N.m, resolution 0.001N.m, 0.5 Precision, Locking Drill Chuck Design, Segment LCD, Peak Hold Time and Gravity Acceleration Value can be set.

Range 200N.mm, load Graduation 0.2N.mm, unit N.mm, gf.cm, ozf.in, Precision +/- 1%, swirl/spin range -3000.0~ + 3000.0 °, angle Graduation 0.1 °, loading mode manual.

Range 20N.m, load Graduation 0.01N.m, Sensors structure Sensors built-in, Precision +/- 0.5%.

Range 10N.m, load Graduation 0.001N.m, Sensors structure Sensors built-in, Precision +/- 0.5%.

Range 1N.m, Graduation 0.0001N.m, with mechanical overload protection device, two-way calibration, Precision +/- 0.5%, clamping range standard φ 28mm-φ 185mm.

Range 500N.m, accuracy class 2, Graduation 0.2N.m, used to detect motor, gear reducer and other products, segment LCD, three test modes, can set the upper and lower limit comparison value.

Range 50N.m, accuracy class 2, Graduation 0.02N.m, used to detect motor, gear reducer and other products, segment LCD, three test modes, can set the upper and lower limit comparison value.

Range 1N.m, Graduation 0.0005N.m, Precision level 0.5, segment LCD, three test modes, intelligent charging, designed to detect devices with high Rotation speed and Impact torsion.

Range 2N.m, load Graduation 0.001N.m, Sensors structure Sensors built-in, Precision +/- 0.5%.