Cross-Cut Tester

Brand

All >

Cut Spacing

All >

All
1mm
1.5mm
2mm
3mm

Number of Cutting Edges

All >

All
6
11

Test substrate

All >

All
Hard substrate
Soft substrate

Measured film thickness

0 ~ 60µm >

All
0 ~ 60µm
61 ~ 120m
121 ~ 250µm

Cutter Type

All >

All
Single blade
Multi-blade

Applicable standard

All >

All
GB/T 9286
ASTM D3359
ISO 2409
Miscellaneous

Miscellaneous

All >

All
guide plate
Scribe
tape
handle
knife head

Country

China >

Featured Filter Service

Featured Hot Price

$ 188.00

QFH Cross Hatch Cutter 1/2/3 mm Tooth QFH Cross Hatch Cutter 6 Tooth SE
6 teeth1mm、2mm、3mm

1 + 2 + 3mm tooth spacing; 6 teeth; multi-blade swirl/spin head; in line with ISO2409 standard.

Compare
SPEC OI VIDEO
$ 134.00

TRUIT TR 5006A Multifunctional cross-cut board cross-cut 7, 11 SE
7、111、1.5、2、3mm

Cross-cut length 35mm, cross-cut number 7, 11, cross-cut spacing 1, 1.5, 2, 3mm, 304 stainless steel, with 600 type tape and nylon brush.

Compare
SPEC CAT
$ 179.00

QFH Cross Hatch Cutter 1/2/3 mm Tooth QFH Cross Hatch Cutter 11 Tooth SE
11 teeth1mm、2mm、3mm

QFH comes standard with 1mm/2mm/3mm cutter heads, which comply with ISO2409-1974 standards and are suitable for organic coating coating testing.

Compare
SPEC
MODERNER QFH 1mm (5 slots) Cross Hatch Cutter Number 6 SE
6 teeth1mm0 ~ 60µm

1Mm cutter tooth spacing; 6 teeth; three-edged swirling/spinning cutter head; suitable for 0-60um film thickness environment.

Compare
SPEC OI VIDEO
$ 131.00

QFH cross-cut Tester QFH-A600 JFL Adhesion Tester organic coating adhesion SE
6 teeth/11 teeth1mm、2mm0 ~ 60µm

Compare
SPEC OI VIDEO
MODERNER QFH 1mm (10 slots) Cross Hatch Cutter 11 blade 1mm pitch SE
11 teeth1mm< 60μm

1Mm cutter tooth spacing; 11 teeth; three-edged swirling/spinning cutter head; suitable for 0-60um film thickness environment.

Compare
SPEC OI VIDEO
$ 146.00

TRUIT TR 5001/1 adhesion Cross Hatch Cutter 1mm/6 teeth SE
6 teeth1mmHard substrates (metal) with film thickness < 60 μm

Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, knife pitch 1mm, number of teeth 6, single working face.

Compare
SPEC CAT
$ 146.00

TRUIT TR 5001/2 Cross-cut adhesion instrument 1mm/11 teeth SE
11 teeth1mmHard substrates (metal) with film thickness < 60 μm

Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with 1mm knife spacing, 11 teeth, and a single working face.

Compare
SPEC CAT
$ 146.00

TRUIT TR 5006/3 cross-cut plate cross-cut number 6 SE
63mm

Using 304 stainless steel, cross-cut length 35mm, cross-cut number 6, cross-cut spacing 3mm, with 600 type tape and nylon brush.

Compare
SPEC CAT
$ 181.00

PUSHEN HGQ 1mm Single Blade Cross Hatch Cutter Standard 2 1mm Single Blade Cross-cut Testers SE
11 teeth1mm

1Mm tooth spacing, 11 teeth; 2 single-sided stainless steel cutter heads; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ASTM/D3359 standards.

Compare
SPEC CAT OI VIDEO
$ 178.00

QFH-A cross-cut adhesion Tester YONGLIDA standard 3 swirl/spin cutter heads SE
6 teeth1mm、2mm、3mm

The QFH-A cross-cut adhesion Tester is equipped with three swirl/spin cutter heads with a spacing of 1mm, 2mm, and 3mm. The QFH-A cross-cut adhesion Tester is designed according to the standard ISO2409 and is suitable for GB/T9286 standards.

Compare
SPEC CAT
$ 181.00

Pushen HGQ 1mm Single Blade Cross Hatch Cutter for Determination of Adhesion by Coating Cross-cut Method SE
11 teeth1mm、2mm

1mm + 2mm tooth spacing; 11 teeth; 2 single-sided stainless steel cutter heads; wooden handle; suitable for 0-120um film thickness; in line with GB/T9286, ASTM/D3359 standards.

Compare
SPEC CAT OI VIDEO
$ 181.00

Pushen HGQ 1 * 5 Multi-blade Cross Hatch Cutter Suitable for hard substrates less than 60μm SE
6 teeth1mm0 to 60 µm (solid substrate)

1mm cutter tooth spacing, 6 teeth; 1 multi-edge stainless steel swirl/spin cutter head; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ISO2409 standards.

Compare
SPEC CAT OI VIDEO
$ 131.00

QFH film cross-cutting instrument YONGLIDA Adhesion Tester comes standard with two knife heads SE
6 teeth1mm、2mm

The number of teeth is 6, and the spacing between teeth is 1mm and 2mm. The application standards are ISO2409 and GB/T9286.

Compare
SPEC CAT
$ 181.00

PUSHEN HGQ 1 * 10 Multi-blade Cross Hatch Cutter Number of teeth 11 teeth, pitch 1mm SE
11 teeth1mm0 to 60 µm (solid substrate)

1Mm cutter tooth spacing, 11 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ISO2409 standards.

Compare
SPEC CAT OI VIDEO
$ 8842.00

HUITAO HT-430P electric cross-cut tester, desktop PLC control automatic cross-cut adhesion testing SE
Adopt PLC control and touch screen operation, support a variety of cross marking modes (such as 6 × 1, 11 × 2) and 0-1000mm/min speed adjustment, with automatic clamping and 90 degree swirl/spin function, suitable for accurate testing of different Film thickness samples.

Compare
SPEC
$ 5710.00

HUITAO HT-110 hundred grid method scratch tester, scratch resistance test of automotive plastic interior and exterior trims SE
The device uses metal scraping needle to cross scribe with 5-15N force, which can measure the color difference before and after scraping. It has two scribing speed and length combinations, nine predetermined cross scribing modes and free program control, and has a wide clamping range and convenient operation.

Compare
SPEC