Miscellaneous Sclerometer

Test range 0Kgf-20Kgf, 0N-196N, 0F-4426F, resolution 0.01Kgf, 0.1N, 0.0126F, diameter test range 15mm, accuracy +/- 0.5% FS (range) +/- 1 digital peak, unit kgf, gf, N, Lbf, Measured value peak, instantaneous value.

Hardness measurement 63~ 105HRF brass, handheld design, workpiece size thickness 0.4-6 mm, inner diameter > 10mm, through anodic oxidation treatment, high toughness surface glass.

Suitable for soft aluminum or aluminum alloy; Maximum Hardness value can be recorded; Measured at one pressure, in line with ASTM B648, HD2583, GB/T3854 standards.

Resolution 0.1Hba; in line with ASTM B648, ASTM HD2583, GB/T3854 standards; equilibrate positioning device, Hardness value digital display device, removable Hardness value calibrating device; can measure Pap/Brinell/Vickers/Wechsler/Rockwell various Hardness values.

Measurement range 0-100kg (0N-1000N), test depth 0-30cm, can be used to detect various backfill, clay, sand and mixed soil after rolling, often used in the environment highway, railway, reservoir, embankment, dam and civil buildings, etc

Hardness range of 25~ 110HRE aluminum alloy, handheld design, workpiece size thickness 0.4-8 mm, inner diameter > 6mm, range 0~20HW, through anodic oxidation treatment, high toughness surface glass.

Test aluminum alloy, workpiece size thickness 0.4~ 13mm, inner diameter > 10mm, Hardness range 25~ 110HRE, anodic oxidation treatment, high toughness table glass, Measurement.

Test aluminum alloy, workpiece size thickness 0.4-6 mm, inner diameter > 10mm, in line with Chinese non-ferrous standard YS/T420-2000 and American standard ASTM B647-84.

Hardness range 50~92HRB, test stainless steel strip cold-rolled thin steel strip, workpiece size thickness 0.4-6 mm, inner diameter > 10mm, range 0~20HW, accuracy 0.5HW, in line with national standards, can be Measurement.

Designed for the aluminum processing and frp industry for Hardness measurement of pure aluminum and aluminum alloys. Wide test range (0~100HBa), no support required, suitable for oversized or overthick workpieces, and with MAX Maximum hold. Compliant with ASTM and GB/T standards.

Special tools for testing soil hardness, high-precision and high resolution, provide N (Newton), kg (kg), lb (pounds), g (grams) four different measurement units, can use alkaline battery power supply, also support 5V DC power supply mode, easy to use in different occasions.

Designed for the aluminum processing and FRP industry, Hardness measurement from pure aluminum to hard aluminum alloys. Measurement range 0~100HBa, no support required, suitable for oversized or very thick workpieces, supports the measurement of various Hardness values, and has MAX Maximum hold and average calculation functions for easy operation.