TRUIT TR 5220 T Bending Testing Machine

TR 5220

T-type bending testing machine

In line with GB/T12754 standard, the first bending angle is < 45 °, the thickness of the test sample: 0.5~ 1.0mm, and the stroke of the flattening mechanism is ≥ 10mm.

Introduction

The design and use of the T-bending test machine conforms to the GB/T12754 standard to ensure the accuracy and reliability of the test. It is mainly used to test the bending performance and bending strength of colored steel plates and steel strips, and can also be used to test the flexibility of coatings.

During the test, the color steel plate or steel strip sample to be tested is placed on the support rod of the testing machine, and then the bending force is applied through the loading rod to cause the sample to bend and deform. The testing machine can accurately control the applied force and record the deformation of the sample.

Principle

   Through the rotation of the left handle, the square bending block presses the bending piece and forms a shape with an angle of <45°; turning the right handle drives the crank lifting mechanism to make the triangular bending rise and fall quickly, so that the test piece is clamped or pressed Flat, forming a T-shaped bend.

The main structure

• Bottom plate and left and right side panels

• Gear pair and crank lifting mechanism

• Triangular curved sub-flat fast

• Square rotating folding block

• Guard plate and handle etc.

Packing list：Host X1, handle X1, certificate X1, manual X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.