DB43/T 2422-2022 《Specifications for the management of government service centre- Part 1: Construction for government service centre》 Related products

In line with GB 9639.1 standard, color touch screen, with A, B dual mode design, Measurement range A method: 50~2000g, B method: 300~2000g, fixture inner diameter φ 125mm.

Impact Energy range 3J, minimum scale value of 0.01J, pendulum swing radius R280mm, specimen holder diameter φ 60, φ 89mm, used to determine the anti-pendulum Impact of Plastic film, sheet, composite film.

The impact speed is 2.9m/s, the strike center distance is 230mm, and the pendulum lift angle is 150 °. It is controlled by a single-chip microcomputer to automatically correct the energy loss caused by friction and wind resistance, and automatically calculate the impact strength of the sample.

Anodic oxidation aluminum material; containing 12 stainless steel shaft rods; shaft bending test; in line with GB/T6740, ISO1519 standards.

PUSHEN GZY-I Linear Drying Time Recorder is used to test the drying and curing time of coatings and paints. According to the drying condition of the surface coating, the specimen is moved vertically to meet ISO and ASTM standards to ensure the mass of coatings and paints.

Cantilever beam 1/2.75/5.5J, simply supported beam 0.5/1/2/4/5 J, using semi-automatic control, LCD display supports printout.

The drying and curing time of Coating and paints were measured by observing the change of scratch track. The number of strokes was 6, the size of the strokes was φ 1mm, the load weight was 11g, the stroke was 300mm, and the track period was 1h/6h, 2h/12h, 3h/24h.

Impact height 1m, Striker Diameter φ 8mm; in line with GB/T 1732 standard; with die support, to prevent the test plate by Miscellaneous shear force.

Impact speed 2.9m/s, simply supported beam 0.5, 1J, 2J, ≥ 4J, LCD screen, semi-automatic control, printable output.

Designed to measure the flexibility and T-Bend performance of Color plate coatings, the device meets the requirements of the NCCA Standard "T" Bend Test Method. The device is suitable for 0.2 to 1.5mm thick steel plates and Aluminum Panels to ensure accurate flexibility testing

Conical bending measurement; in line with GB11185, ISO6860 standards; material is stainless steel; small size, light weight.

The QTY-10A Paint Film Bending Tester is used to evaluate the flexibility of the paint film, with eight different diameter shaft rods of 2, 3, 4, 5, 6, 8, 10 and 12mm.

Impact height 120cm, sub-scale 1cm, drop weight mass 2000g, Striker Diameter φ 16mm, Impact depth 2.5mm, die base aperture φ 16.3mm, meeting the standard ASTM D 2794-92.

Impact height 0~50cm, sub-scale 1cm, drop weight mass 1000g, Striker Diameter φ 8mm, Impact depth 2mm, die base aperture φ 15mm, meet the standard GB/T 1732

Impact height 0~100cm, drop weight mass 1000g, 1000g, Striker Diameter φ 20mm. Designed and manufactured according to ASTM D2794, ISO6272 standards

In line with the national standard GB/T1732, Impact height can be adjusted from 0 to 100cm, suitable for film Impact performance testing. Its weight mass is 1000g, Striker Diameter is φ 8mm, easy to operate, suitable for impact resistance evaluation of various films.

Impact height 120cm, Impact height 0~120cm, drop weight mass 1kg, 1.36kg, 2kg, Striker Diameter φ 8mm, φ 15.87mm, φ 20mm, meet the standards GB/T1723, ASTM MD2794, ASTM G14, IBCI5C139.

Impact height 120cm, sub-scale 1cm, drop weight mass 1000g, Striker Diameter φ 8mm, Impact depth 2mm, die base aperture φ 15mm, curvature radius R2.5~ 3mm, meet the standard GB/T 1732