TAPPI T 248 《Laboratory beating of pulp (PFI mill method)》 Related products
The TAPPI T 248 standard specifies a method of laboratory beating of pulp using a PFI mill to assess the paper-making performance of the pulp. The method is suitable for various types of pulp, but may not work well for certain long-fibre pulps, such as cotton pulp. The PFI mill method is particularly well suited for handling smaller quantities of specimens compared to the Valley grinder method described in the TAPPI T 200 standard. During the test, a certain amount of pulp is placed in a PFI mill at a specific concentration. The pulp is pulped to evaluate its mass by relative movement between the grinding roller and the smooth grinding chamber wall and by a specific load applied.
This summary is not the original standard text and is for reference only. For accurate information, please obtain it through official channels.
| Status | Active |
|---|---|
| CCS | ICS |
| Release Date | 2015-01-01 00:00:00 | Implementation Date |
Extended reading
- 1TAPPI UM 205《Dirt in pulp (measured by transmitted light)》
- 2TAPPI UM 258《Laboratory processing of pulp (Kollergang method)》
- 3TAPPI UM 221《Laboratory processing of pulp (plate refiner)》
- 4TAPPI T 489《Bending resistance (stiffness) of paper and paperboard (Taber-type tester in basic configuration)》
- 5TAPPI UM 596《Water absorbency of nonbibulous paperboard》
- 6TAPPI UM 411《Opacity of paper using 45°/0° geometry reflectometer》
- 7TAPPI T 1200《Interlaboratory evaluation of test methods to determine TAPPI repeatability and reproducibility》
- 8TAPPI T 821《Pin adhesion of corrugated board by selective separation》
- 9TAPPI T 435《Hydrogen ion concentration (pH) of paper extracts (hot extraction method)》
- 10TAPPI T 452《Brightness of pulp, paper, and paperboard (directional reflectance at 457 nm)》