HBO

Range 200N, support fixed height measurement value, fixed deformation measurement value, fixed force value measurement height, fixed force value measurement deformation four Measurement mode, can customize 10 groups of test points, built-in micro printer.

It is suitable for wall thickness measurement of cast iron, plate, pressure excitation vessel and other materials; supports single/double/multi-point measurement method; there are ordinary/micro/cast iron multi-probe optional.

Support N, kg, lb three units, load up to 20KN, force Graduation 0.01KN, 7-inch touch LCD screen, with pull and break stop function, support automatic programming mode, with printing interface.

Support Ra, Rz, Rq, Rt, Rp, Rv, R3z, R3y, Rz (JIS), Rs, Rsk, Rsm, Rku multiple parameters, 200μm large range, can be connected to a computer, can store 100 sets of data.

Support N, kg, lb three units, load up to 30KN, force Graduation 0.01KN, 7-inch touch LCD screen, with pull and break stop function, support automatic programming mode, with printing interface.

Range 5000N, support fixed height measurement value, fixed deformation measurement value, fixed force value measurement height, fixed force value measurement deformation four Measurement modes, can customize 10 groups of test points, built-in micro printer.

With Ra, Rz, Rq, Rt parameters, stroke length 6mm, one point calibrated simple to use, optional 0.25, 0.8, 2.5 three cut-off wavelength filter, metal shell.

Support N, kg, lb three units, load up to 5000N, force Graduation 1N, 7-inch touch LCD screen, with pull and break stop function, support automatic programming mode, with printing interface.

The range is 10KN, and it supports four Measurement modes of fixed height force measurement value, fixed deformation force measurement value, fixed force value measurement height, and fixed force value measurement deformation. It can customize 10 groups of test points and has a built-in micro printer.

LCD display, can switch Hardness ruler Vickers (HV) and Knoop (HK), range 0-3000HV, automatic loading, Light source luminance can be adjusted in 20 levels.

Support N, kg, lb three units, load up to 10KN, force Graduation 0.005KN, 7-inch touch LCD screen, with pull and break stop function, support automatic programming mode, with printing interface.

Support N, kg, lb three units, load up to 50KN, force Graduation 0.01KN, 7-inch touch LCD screen, with pull and break stop function, support automatic programming mode, with printing interface.

Range 500N, support fixed height measurement value, fixed deformation measurement value, fixed force value measurement height, fixed force value measurement deformation four Measurement modes, can customize 10 groups of test points, built-in micro printer.

Range 2000N, support fixed height measurement value, fixed deformation measurement value, fixed force value measurement height, fixed force value measurement deformation four Measurement mode, can customize 10 groups of test points, built-in micro printer.

Range 100N, support fixed height measurement value, fixed deformation measurement value, fixed force value measurement height, fixed force value measurement deformation four Measurement mode, can customize 10 groups of test points, built-in micro printer.

Range 300N, load Graduation 0.01N, Test space 220mm, four test modes, with automatic reset and variable speed functions, can prepare test reports, with a variety of protection functions.

Range 30N, load Graduation 0.001N, Test space 220mm, four test modes, with overload protection and leakage protection functions, can prepare test reports, with automatic reset function.

Test speed 0-500mm/min stepless adjustable, with pull-off stop, force value maintenance, set force value round-trip movement and upper and lower limit qualified judgment and other practical functions.

Suitable for thin samples with thickness less than 6mm, with multiple Measurement modes such as real-time, peak, automatic timing and average value, Indication Error ≤ +/- 2HAM, can be connected to the host computer for data Linear dispersion analysis.

Suitable for materials with Hardness below 20HO, such as extremely soft rubber and sponges. Measurement modes of real-time, peak, automatic timing and average value, force holding time can be set, and special Software supports Linear dispersion display and qualified judgment.

Suitable for very soft materials with Hardness below 20HO, such as rubber, sponge and thermal plasticity resilience. Measurement modes of real-time, peak, automatic timing and averaging, with dedicated Software supporting Linear dispersion analysis, qualified judgment and report generation.

Suitable for thin and irregular samples, with real-time, peak, timing and average multiple Measurement modes, Measurement range 0-100HM, resolution 0.1HM, can be connected to the computer for data management and analysis.

Equipped with fixed load weight to ensure stable load, adjustable horizontal table can be accurately leveled with hardness gauge, Glass table is flat and wear-resistant and rust-proof, column lifting space up to 180mm, effectively improve test Repeatability and accuracy.

Stepping motor and High Accuracy encoder, high mechanical stability accuracy. With force value, displacement, speed controllable and pull-off stop, force holding, fatigue test and other functions, support independent programming and batch testing, equipped with limit and leakage protection.

Suitable for medium Hardness rubber, thermal plasticity resilience and plastics, Measurement range 0-100HC, Indication Error ≤ +/- 1HC, can be used with handheld or matching bench, in line with ASTM D2240 standard.