mitech

Black light irradiance > 4000 µw/cm ², white light intensity > 2000lux and the white light fluorescence of the lighting device can be switched, continuous working time ≥ 5h, charging time 3-4h, lifting force ≥ 118N (not less than 12 kg) and high comprehensive sensitivity (A-type 15/100 standard test piece manual engraving shows clearly)

Small size, light weight, easy to operate, set a variety of product functions in one, equipped with three probes to achieve three flaw detection functions, suitable for multi-industry complex workpiece defect detection, intuitive detection and can determine the nature of defects

Portable integrated design (AC magnetization power supply has a built-in magnetic yoke, integrating magnetic detection/power supply/lighting functions), large-capacity lithium batteries can be disassembled and assembled independently, and 5 hours of long standby (support no power supply in the field and high-altitude work)

Working gap time 1 second on 2 seconds off, battery use time more than 6 hours, charging time 8~ 15h, rechargeable battery MF12-7.2H, charging power supply 220V 50Hz

Detection range 0-5mm, 1 channel can be extended to 8, 10Hz-16MHz wide frequency range/1KHz step adjustment, crazing detection accuracy 3mm × 0.1mm × 0.1mm (steel test block), pipe detection 0.3mm through hole up to 8db (copper pipe)

Break through the traditional dependence on 220V power supply limitations, support AC/DC dual mode power supply, lightweight integrated design, specially optimized for high-altitude and small space operations. With ≥ 22.2kg DC lifting force, 0-230mm adjustable yoke pitch, in line with JB/T7411-2012 standard.

Battery and yoke integration can be replaced independently, intelligent identification magnetization (contact workpiece automatic magnetization, leave stop), fluorescent white light can be switched and strong illumination, yoke spacing adjustable, probe foot adjustment is convenient, lifting force and sensitivity are not affected by electricity, full power continuous work for more than 5 hours

Working gap time 1 second on 2 seconds off, battery use time more than 6 hours, charging time 8~ 15h, rechargeable battery MF12-7.2H, charging power supply 220V 50Hz

AC/DC dual power supply mode, with 0-230mm adjustable yoke spacing and 216N strong magnetization ability, with high Sensitivity detection of A1 test piece 15/50 notch, can accurately identify the surface crazing defects of ferromagnetic materials, in line with JB/T7411-2012 industry standard.

According to the principle of ultrasonic propagation, it can accurately and sensitively detect, locate, evaluate and diagnose various defects in the workpiece, and efficiently detect the illegal modification, digging, sanding, gasket, repainting, and unauthorized re-engraving of the vehicle identification code.

Working gap time 1 second on 2 seconds off, battery use time more than 6 hours, charging time 8~ 15h, rechargeable battery MF12-7.2H, charging power supply 220V 50Hz

AC and DC dual power supply mode, with 0-230mm adjustable yoke spacing and 216N strong magnetization ability, with A1 test piece 15/50 notch high sensitivity detection, can accurately identify the surface crazing defects of ferromagnetic materials, in line with JB/T7411-2012 industry standard.