Miscellaneous instruments

Working pressure 0-5MPa adjustable, Heating power 3000W, suitable for paper hot pressing and hot calendering experiments.

ZY-CP-2 water circulation sheet reader adopts white water circulation and electric sizing technology, with a diameter of 200mm and a power of 370W, which is suitable for high-efficiency pattern prepative.

ZY-CP-3 water circulation sheet reader adopts bubble homogenization technology, with a diameter of 200mm and a capacity of 10 liters, which is suitable for rapid preparation of standard paper samples.

Pneumatic pressure is low noise, easy to adjust, adjustable working pressure 0~ 0.9MPa, limit pressure 0.5~ 0.9MPa, suitable for sample size 310mm × 310mm × 200mm.

Sample diameter ≤ 200mm, Vacuumpump vacuum -0.092~ -0.098MPa, Vacuumpump pumping capacity 80~120 liters/min, drying temperature ≤ 120 ℃, vacuum pressing force Technologies 0.1MPa, drying time (quantitative 30-80g/m2): 4-6 minutes, heating power 1.5KW × 2

Three-stage centrifugal Vacuumpump technology, vacuum degree of -0.098MPa, drying Film thickness 10mm, white water circulation and electric homogenization design, no maintenance, stable work in harsh environment.

The ZY-YZ-3 roller press has a working width of 300mm, adjustable line pressure 0.33-80 N/mm, and a top roller stroke of 100mm, which is suitable for all kinds of wet paper pattern pressing experiments.

Large torque, manual speed regulation, digital display Rotation speed, automatic temperature control. 12 liters volume, 0-800n/m speed regulation, 600g absolute dry pulp breaking capacity, 5% -35% dissolving concentration, 800W Heating power

Using infrared radiation heating and fine grinding mirror drying surface to ensure uniform drying; temperature can be adjusted to 180 ℃, heating power 2.0KW, suitable for 0~15mm Film thickness samples.

Meets a variety of international standards, 4-stage screening, 10-liter capacity, adjustable Water Flow rate and screening time.

The ZY-CP-1 sheet shaper uses a 200mm diameter pick-up cylinder with a capacity of 8 liters, is equipped with a manual Stirrer and an 80-mesh forming filter, suitable for pulp copy.

Maximum dehydrate mass 200g, rotational speed 2800r/min, dehydrate time 0.5-30 min adjustable, suitable for slurry concentration determination and sampling.

5-Step stepped screening structure, 10-liter large-capacity sieve, 304 stainless steel material, equipped with independent stirringdevice, water Flow rate 0-20L/min adjustable, to meet a variety of experimental standards.

Sample diameter ≤ 200mm, Vacuum Pump vacuum degree -0.092~ -0.098MPa, Vacuum Pump pumping capacity 80~120 liters/min, drying temperature ≤ 120 ℃, vacuum pressing force Technologies 0.1MPa, used to identify pulp performance and formulate beating process specifications.