Miscellaneous instruments

The maximum height of the plastic test piece is 50~500mm, and the radius of the impact head is 1/4, 3/16, 1/8, 1/16in. The standard meets the requirements of JIS-K5600 (Coating), ASTM-D2794, JIS-K5400 and other standards.

Test products 3, 8-bit counter, with power-down memory function, Test speed 0-300 times/minute, hit switch touchpoint force 0-500gf adjustable.

The diameter of the countertop is 1000mm, and the countertop is made of high-quality lame plating steel plate material, with an angle range of 0-30 ° and a bearing capacity of 120kg.

Drop height 0-2000mm adjustable, drop ball control mode for DC electromagnetic control, in line with JIS-K6745, A5430 test standards.

External instrument, with peak holding function, N, LB, kg three unit conversion function, insertion force range 0-50kgf, speed range 0-60 times/minute.

Computer automatic control stroke, XY stroke 400x300mm, 460 × 360mm Glass table, all marble structure, with adjustable LED ring surface Light source.

Used for a variety of battery short circuit test, using PLC automatic control, applicable to a variety of industry standards, simulating battery external short circuit, recording battery Voltage, current and surface temperature changes, Temperature range at room temperature~ 150 ℃.

Manual operation, XY stroke 200x100mm, 270x160mm Glass table, digital measurement, all marble construction, with adjustable LED annular surface Light source.

Compliant with the American SAMSONITE standard, spring-loaded 7.9kg/mm vibration, LCD digital display, used to test the suitcase handle, sewing line and overall structure.

The diameter of the copying cylinder is 200mm, the capacity of the copying cylinder is 8 liters, and the diameter of the papermaking is Φ200mm, which conforms to the QB/T3703 standard.

Intelligent low temperature thermostatic device

Degree of automation is high, in line with the national bright high temperature propeller, using the measuring rod positioning measurement, flow measurement error ≤ 1.5%.

Speed range FM-100V10 (0.01-10 m/s), flow measurement error ≤ 1.5%, LCD display, Measurement mode, rod positioning measurement

Measurement range of ground Voltage 0~200V, ground Voltage error +/- 2% +/- 5dgt, resolution 0.1V, ground resistance Measurement range 20 Ω: 0~19.99 Ω; 200 Ω: 2~ 199.9 Ω; 2000 Ω: 20~1999 Ω, ground resolution 0.01 Ω~ 1 Ω, used for the measurement of ground resistance of various devices and the measurement of conductor resistance value and ground Voltage of low resistance.

In line with GB/T2166.1, QB/T 4379, Test space 500mm, Microcomputer control, four-column structure, Vibration Frequency 2-3Hz, can freely set the number of fatigue tests.

New fully enclosed Ceramics furnace body design structure, more high temperature resistance

Made of quartz Glass, the distillation water is not in contact with the metal, and the water output is 2500ml/h.

Detection Range 1.8m (50cm * 50cm * 1.2cm Aluminum Panel), Detection Frequency 7.2kHz, Black Nonferrous Metals Identification, Working time 6-10 hours, LCD display/sound prompt mode, specially used to detect buried metal objects in the ground.

In line with the national bright high temperature rotor, suitable for open channel Flow velocity Flow rate measurement in the field, matching Hall Flow velocity swirl/spin Sensors, can measure polluted turbid water flow.

Imported alloy Sensors, new fully enclosed metal furnace body design structure greatly improves sensitivity and stability

Cone penetration (25 ℃, 150g) 1/10mm200~315, ph value 6~ 8, drop point (℃) ≥ 200, evaporation loss (99 ℃, 22h) % ≤ 1.5, volume resistivity (20 ℃, Ω cm) ≥ 108.

Velocity range 0.01-10 m/s, error ≤ 1.5%, using liquid crystal display and measuring rod positioning measurement, simple and lightweight structure, Degree of automation high and stable and reliable.

Adopt double station, rubber hardness Hs80 +/- 5 (Shore A type), roller load 2000g +/- 5g, thickness of about 6mm, used for adhesive tape peeling strength, holding tack and other test specimens.