LEEB Hardness Tester

200~900HLD Hardness range, can realize six kinds of Hardness (HL/HRC/HRB/HB/HV/HS) conversion; with RS232 interface; can repeatedly display various test results, can delete the largest error.

Aluminum alloy shell material, LCD display screen, 9 kinds of measurement materials, steel and cast steel, metallurgical tool steel, forged steel, gray cast iron, ductile cast iron, cast aluminum alloy, pure copper, copper zinc alloy (brass), copper tin alloy (bronze), Measurement range 170~960HLD, 20~68HRC, 19~ 651HB, 80~967HV, 30~100HS, 13~ 100HRB.

D/DC/DL/C type Impact device, measurement accuracy +/- 12HL, Bluetooth connection mobile app, built-in directional Sensors, support Bluetooth connection thermal printer, QC mode and statistical mode two measurement modes.

Hardness range 200~900HLD; one-piece; six Hardness units interchangeable; with USB and RS232 interfaces; support user calibrated; can be purchased separately Bluetooth data output.

DC type impact device, using dual coil technology, more accurate measurement, probe built-in direction Sensors, full angle measurement without error, ten measurement materials can be switched

Aluminum alloy shell, one-piece; measurement of the thinnest 3mm workpiece; 360 degree direction measurement; six Hardness units interchangeable; with USB and RS232 interface; Bluetooth data output can be purchased separately.

Large workpiece hardness testing; 200-900HLD range; External Impact device, supports user calibrating, six Hardness units are transferred to each other, and 50 sets of data can be stored; USB and RS232 interfaces; Bluetooth data output can be purchased separately.

Hardness of various metal materials such as iron, copper and steel can be measured. Dual coil technology provides good measurement accuracy and repeatability. The probe has built-in directional Sensors for full angle measurement.

Support user material calibration function, can display Vickers and selected standard Hardness value at the same time, store up to 600 sets of data, equipped with 3.5 inch IPS LCD screen, continuous Working time more than 10 hours.

Built-in high-speed thermal printer, with dual display function to display Richter Hardness value and Miscellaneous Hardness value at the same time. Measurement range 170~960HLD, 19~ 651HB, 13.5~ 101.7HRB, 17.9~ 69.5HRC, 59.1~ 88HRA, 80~1042HV, 30.6~ 102.6HS, arbitrary measurement direction (360 °).

Measurement range 200~900HLD, error of indication +/- 0.8% (HL = 800), indication Repeatability +/- 0.8%, Hardness standard HL/HRC/HRB/HB/HV/HSD Impact device Type D

It can measure iron, copper, steel and other metal materials. It adopts advanced digital probe technology for accurate testing. The probe has built-in directional Sensors to automatically compensate for measurement errors in different impact directions. A variety of Hardness standards are automatically switched, eliminating the tediousness of manual table checking.

With D-type Impact device and rockwell hardness test block, with Richter, Rockwell, Brinell three Adjustments, error of indication +/- 6HLD, Measurement range 100~990HLD, low power consumption design.

Suitable for field operations, standard D-type Impact device, high-luminance LED backlight display, with Richter, Rockwell, Brinell three Adjustments, Hardness standards HL, HB, HRC, HRB, HV, HS, storage function 600 groups.