Coating Thickness Gauge

Magnetic Induction Thickness Measurement Principle, Thickness Measurement Range 0~2000μm, Accuracy Error +/- 5%, F Split Probe, for measurement of the thickness of non-magnetic conductive coatings on ferromagnetic metal substrates, no supporting software.

LANDTEK hot-selling model, measuring thickness up to 1000μm; External probe, magnetic Induction; Low Voltage prompt; USB and Bluetooth data output can be purchased separately.

Calibration method "rough" can avoid the problem of thickness measurement accuracy deviation caused by surface roughness; continuous measurement, with Bluetooth communication;

Magnetic Induction coating thickness measurement, thickness measurement range 0~12000μm, error +/- 3%, suitable for thick coatings such as anti-corrosion coatings thickness measurement, data can be transmitted through USB connection.

Built-in thickness probe, magnetic Induction and eddy Current dual-use thickness measurement, thickness measurement range 0~1250μm, error +/- 3%, support single and continuous measurement, optional Interface transmission data.

Magnetic Induction and eddy Current dual function, can test magnetic and nonmagnetic substrate, thickness range 0~1250μm, error +/- 3%, can store 99 sets of data, in line with ISO2178, ISO2360, GB4956, GB4957 standards.

Built-in probe, magnetic Induction and eddy Current dual thickness measurement principle, thickness measurement range 0~1250μm, error +/- 3%, in line with GB standard, with data statistics function, can store 99 sets of data.

0~200µm dial type coated platings Thickness Gauge, no power supply, underwater testing, explosion-proof, can measure the surface sample Coating thickness.

Pointer dial type, no power supply, safe explosion-proof, also suitable for underwater measurement of hot-dip galvanized, hard chrome, paints, enamel on steel and other film thickness, can easily measure cylindrical, factory comes with calibrated certificate.

Dual function thickness measurement, built-in probe, automatic identification of substrate; RS232 interface; automatic memory calibrating; hand-held part of the groove design; can be purchased separately USB and Bluetooth data output.

Split, external F1.5 probe, thickness measurement range is 0~1500μm, error range +/- 0.75%, with Bluetooth interface, support for a variety of Calibration methods, supporting software, can transmit data wirelessly.

Iron copper base dual-use measurable, 1.5mm range, continuous measurement, 10w Data storage ， +/- 0.75% accuracy, Bluetooth wireless transmission belt software.

Intelligent wireless thickness measurement, can realize probe + connector + intelligent end point data sharing, can be used for thickness measurement and environment or surface profile detection, supporting free mobile app, probe optional.

LANDTEK hot-selling model, measuring thickness up to 1000 μm, standard dual probe; automatic memory calibrating and substrate identification; Single and continuous Measurement mode; optional USB and Bluetooth data output.

LANDTEK Utility; External Probe, 1250μm; Eddy Current Thickness Measurement; RS232 Interface; Single or Continuous Measurement mode; Wear-resistant hard metal spring guide sleeve probe; optional USB and Bluetooth data output.

Eddy Current thickness measurement principle, split N-type probe, thickness measurement range 0~1000μm, error range +/- 3%, no supporting software, can be used for nonconductive coating testing on aluminum, with automatic shutdown function, can be customized Miscellaneous large range.

LANDTEK mid-range practical type, external probe, magnetic Induction thickness measurement; RS232 interface; Single or continuous Measurement mode; Wear-resistant hard metal spring guide sleeve probe; USB and Bluetooth data output can be purchased separately.

Measurement range 0~5mm, error range +/- 5%, resolution 0.1μm | 1μm, widely used in the measurement of steel, iron and other ferromagnetic metal substrates on non-ferrous magnetic coatings, platings.

LANDTEK mid-range practical type, built-in probe, magnetic Induction principle; RS232 interface; automatic memory calibrating; hand-held part groove design; USB and Bluetooth data output can be purchased separately.

Magnetic Induction and eddy Current paints thickness measurement, with F and N split external probes, thickness measurement range 0~1250μm, error accuracy +/- 3%, LCD screen, with memory calibrated value, automatic identification of different substrates.

Automotive coatings, built-in probe, double thickness measurement principle; RS232 interface; automatic memory calibrating and identification of substrates; hand-held part of the groove design; can be purchased separately USB and Bluetooth data output.

Magnetic Induction eddy Current dual function platings thickness measurement, thickness measurement range 0~1250μm, error range +/- 3%, single or continuous measurement, measurement of copper, aluminum, zinc, tin and other substrate enamel, rubber, paints, plastic layer and other film thickness.

Built-in probe, eddy Current principle; 1250μm; RS232 interface; automatic memory calibrating and identification substrate; RS232 interface; hand-held part groove design.