ZEHNTNER ZCY 2400 Bending Tester
ZCY 2400 round axis Bending Tester uses a single axis to check the quality of the work, or replaces different axes from coarse to fine, and evaluates at what diameter, the surface of the sample begins to be damaged? To judge the adhesion, resilience, ductility of the paint film, Gloss treatment... etc
Model：
ZCY 2400
Zehntner By Proceq
Similar products
-
JINGKELIAN QTY-32-III Film Bending Tester cylindrical mandrel bending test machine, film flexibility$ 332.00SE -
JINGKELIAN QTY-32 cylindrical mandrel bending Tester to determine the ability of the paint film to deform with the substrate without damage$ 270.00SE -
MODERNER WQ-ⅱ Cylinder Bending Tester 9 cylinders of different diameters -
Pushen QTY-32 Bending Tester$ 487.00SE -
TQC SP1820 cylindrical mandrel bending Tester, test plate size 180x100mm$ 3666.00SE
Zehntner By Proceq ZCY 2400 Bending TesterSPEC
Zehntner By Proceq ZCY 2400 Bending TesterDetails
Zehntner By Proceq ZCY 2400 Bending TesterPacking list
- SKU
- NB013757
- Meet the standard
- EN ISO 1519, ASTM D522
ZCY 2400
Bending Tester
FAQ
QMeet GB/T6742 Round Shaft Bending tester
A
ZCY 2400 Round Shaft Bending tester, please refer to it.
Knowledge
- 1Working principle and application analysis of platings Bending Tester
- 2Detection method of cylindrical shaft bending Tester
- 3Test application of T-type Bending Tester on composite silane film
- 4Use of conical mandrel bending Tester
Standard
- 1JB/T 3078-2015《Varnishes used for electrical insulation.Silicone impregnating varnishes》
- 2ISO FDIS 1519-2010《Paints and varnishes. Bend test (cylindrical mandrel)》
- 3NF 《Paints and varnishes - Bend test (cylindrical mandrel)》
- 4 2099-2013《Paints and varnishes.Bend test(cylindrical mandrel)》
- 5DIN EN ISO 1519-2003《Paints and varnishes - Bend test (cylindrical mandrel)》
- 6NF EN ISO 1519-2002《Paints and varnishes - Bend test (cylindrical mandrel).》
- 7GB/T 9989.4-2015《Vitreous and porcelain enamels—Determination of resistance to chemical corrosion—Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel》
- 8ISO 1519-2011《Paints And Varnishes - Bend Test (Cylindrical Mandrel)》
- 9ASTM D522/D522M-2021《Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings》
- 10GB/T 6742-2007《Paints and varnishes - Bend test (cylindrical mandrel)》